Quick Installation Guide

InstructionsforInstallationandUseoftheC3100/200/400ControlPanel
26
An access control operator panel is powered by +12V DC. Generally, to reduce
power interference between control panels, each control operator panel should be
poweredseparately.When highreliabilityisrequired,controlpanelsand electronic
locksshouldbepoweredrespectively.
Topreventpowerfailureofacontroloperatorpanelfrommakingthewholesystem
unabletoworknormally,theaccesscontrolmanagementsystemisusuallyrequired
to have one UPS at least, and access control locks are powered externally to
guarantee the access control management system can still work normally during
powerfailure.