User`s manual

- page 13 -
#13
* Gráfico solo valido para los modelos MT 2000 y MTs 2400.
INPUT CONNECTORS
OUTPUT CONNECTORS
SWITCH STEREO / BRIDGE
SWITCH GROUND / LIFT
POWER SUPPLY
SWITCH 1.4V / 0dBu
SWITCH LINK / OFF
FUSE
FAN COOLER
1
2
3
4
5
6
6 - SWITCH STEREO / BRIDGE
Turn off energy before changing the operation manner. In the Stereo operation , each channel of the amplifier operates independently from their own
signal and speakers. In the bridge operation, both channels can be configured to handle a singular load with double energy. Use the following safety
procedure when pressing stereo or bridge mode.
6 - SWITCH 1.4 V / 0dBu
By means of this switch you will be able to select the sensitivity of your amplifier 0dBu ( systems unbalanced) or 1,4 Volt ( balanced systems).
6 - SWITCH GROUND / LIFT
This switch acts the as to connect the mass of signal entrance to chassis ( GROUND) or to leave it floating way ( LIFT).
6 - SWITCH LINK / OFF
By means of this switch you will be ableto connect several equipment in parallel, using anyone of the two connectors ( INPUT) like signal
entrance and the rest like exit to another amplifier.
MEASURE AND WEIGHT REFERENCE
MODELS
250, 500, 1000, 1500, 700, 1400 and 8001.
Width
Height: 129 mm
Depth: 375 mm
: 485 mm
Weight
MT 250: 9.6 Kg
MT 500:13.1 Kg
MT 1000: 14.9 Kg
MT 1500: 18 Kg
MTs 700: 16.6 Kg
MTs 1400: 17.8 Kg
MODELS
2000, 2400.
Width: 485 mm
Height: 129 mm
Depth: 555 mm
Weight
MT 2000: 30 Kg
MT 2400: 28 Kg
MT 1500
0MT 240
USER`S MANUAL MT, MTs and MTc SERIES
USER`S MANUAL MT, MTs and MTc SERIES
MTc 8001: 16.6 Kg