Installation Guide

Five Easy Steps to Installation
Step one: Locate the center
above the stove where the hood
is to be installed. Ensure that the
bracket will be secured to solid
wood backing. Install the duct
work in the center of the bracket.
Secure the upper end of the
bracket to the ceiling as shown in
fig.1.
fig.1
Step two: Attach back draft
damper to top of hood to prevent
outside air from entering. fig.2
Step three: Attach the lower
portion of the chimney to the
motor housing with the screws
provided. fig.3
fig.2
fig.3
5
4
10