Use and Care Manual

33
3. Delay
To delay the start of a selected cycle, press the delay start pad until the desired delay
time shows in the LED display. You can delay the start for 1 to 24 hours. To cancel the
delay start option before the delay period is over, press the start/cancel pad for 3-5
seconds.
4. Display Window
This displays the remained hours and minutes of the running cycle, delay
hours, and error codes etc.
5. Status Indicators
R - Rinse detergent needs to be refilled.
P - Program end.
N- Water failure, faucet is not open.
6. Options
H - Heating Dry
When the heating dry function is selected, the heater will work during
the dry process.
S - Sanitize
When the sanitize function is selected, the temperature of water will
be maintained at 156.2°F max. The max temperature may
not be reached if the incoming water temperature is not correct. Certified
residential dishwashers are not intended for licensed food establishments.
H - Hi Temp
When the hi temp wash function is selected, the temperature of the
water will be maintained at 140°F max.
Operating Instructions
Note:
The sanitize option is available with
heavy, normal, and ECO cycles.
Note:
The hi temp option is available with heavy, normal, ECO, and glass
cycles.