K itchen A ccessories Installation Guide and Users Manual
Professionally design your home with ZLINE’s Designer Kitchen and Bath Accessories. With a wide selection of accessories available, you can perfectly customize your kitchen and bath space to your style. The ZLINE Kitchen and Bath Accessories come in our specialty Chrome, Brushed Nickel, Gun Metal, Matte Black, and Polished Gold finishes for you to expertly coordinate and complete your kitchen and bath collection.
WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
TABLE OF CONTENTS SAFETY INSTRUCTIONS 1 Prior to Installation Safety Tips Installation Preparation Care and Maintenance POT FILLER 2 Parts Dimensions Tools Assembly DRINK FAUCET 8 Parts Dimensions Tools Assembly SOAP DISPENSER 14 Parts Dimensions Tools Assembly TROUBLESHOOTING 18
Safety Instructions Prior to Installation Make sure that the cold and hot water lines are turned off. Wrap all threaded connections with plumber’s tape. Always wrap in a clockwise direction. Cover your drain to avoid losing parts. Do not disassemble the main faucet body, as it has been installed and commissioned correctly and precisely before delivery to the factory. To keep the faucet from jamming, flush the water pipe before installation. Operating conditions: Working pressure at 0.05-1.
Pot Filler 1 2 3 4 5 1. Wall anchor 2. Mounting plate 3. Screws 4. Flanges 5.
ζੋ҉स եِ - ᨷࠡ 39' ཏ۱ Pot Filler ࢺ ܜ ۜ ࢺ ܜ *(0 )3) &+ *(0 )3) %1 *(0 )3) 3* *(0 )3) 0% PP ,Q ,Q ,Q ,Q ,Q ζੋ҉स եِ - ཏ۱ ᨷࠡ 39' پౄ 25% ,Q ۜ && 66 ..
Pot Filler Tools needed: Time required: Wrench Drill Phillips-head screwdriver Bucket Pencil Legend: Plumber’s Tape- Used for a watertight seal on threaded pipe joints.
Pot Filler Align faucet parts with pipe to check for compatibility. Note the position of the mounting bracket by marking the screw holes. Drill in the wall anchors. Screw the screws into place.
Pot Filler Secure the mounting plate with the included hex key. 6 Review the diagram to understand the on and off settings.
7
Drink Faucet 1 2 3 4 8 1. Faucet Body 2. Rubber Washer 3. Metal Washer 4.
ࢺ ܜ )%9 &+ )%9 %1 )%9 3* )%9 0% )%9 *0 Drink Faucet PP ,Q ࢺ ܜ ۜ ,Q ,Q ,Q ҉ ஆ ఐ γޚ ༉ৃޚ؟ ,Q ҉ ஆ ఐ 9
Drink Faucet Tools needed: Time required: Wrench Drill Phillips-head screwdriver Bucket Pencil Legend: Cold Water Plumber’s Tape- Used for a watertight seal on threaded pipe joints.
Drink Faucet Loosen the fixing nut and washers and Mount faucet to counter top. put aside. Secure the hardware into place with the nuts and screws. Secure the fixing nut into place.
Drink Faucet Test the faucet. 12 Review the diagram to understand the on and off settings.
13
Soap Dispenser 1 2 3 4 14 1. Soap Dispenser Head 2. Rubber Washer 3. Locknut 4.
Soap Dispenser 15
Soap Dispenser Tools needed: Wrench Wrench Bucket 16
Soap Dispenser Loosen the locknut and washers and put aside. Mount soap dispenser to counter top. Secure the hardware into place. Test the soap dispenser.
TROUBLESHOOTING Problem Possible Cause Solution There is leakage under the The locking nut has Unscrew the lever on the handle. come loose. handle by hand. Loosen set screw with a hex wrench. Remove the handle and unscrew trim cap by hand. Tighten locking nut with an adjustable wrench. Water will not shut off Cartridge may be Unscrew the level on the completely. defective. handle by hand. Loosen set screw with a hex wrench. Remove the handle and unscrew trim cap by hand.
Three Locations: 350 Parr Circle Reno, NV 89512 916 Delaware Avenue Marysville, OH 43040 427 Rowland Mill Road Bruceton, TN 38317 www.zlinekitchen.com 1-614-777-5004 1.1.
