E merald B ay S hower S ystems Installation Guide and Users Manual
We continually strive to improve our products. We may change our specifications and design without prior notice. WARNING: This product can expose you to chemicals including nickel, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Sourced with materials from across the world, ZLINE’s shower systems are easy to operate, reduce water waste, and complement bathroom décor. This exclusive collection blends modern technology with traditional appeal — offering a wide array of finishes. ZLINE showers offer an aerated water flow for resource conservation, helping both the environment and your wallet. The housing material composition consists largely of brass, which is extremely durable and leak proof.
TABLE OF CONTENTS SAFETY INSTRUCTIONS 1 Prior to Installation Safety Tips Care and Maintenance 2 POINT SHOWER SYSTEM (EMBY-SHS-T2) 2 Parts Dimensions Tools Assembly 3 POINT SHOWER SYSTEM (EMBY-SHS-T3) 21 Parts Dimensions Tools Assembly TROUBLESHOOTING 48
Safety Instructions Prior to Installation Make sure that the cold and hot water lines are turned off. Wrap all threaded connections with Teflon tape. Always wrap in a clockwise direction. Cover your drain to avoid losing parts. Do not disassemble the main system body, as it has been installed and commissioned correctly and precisely before delivery to the factory. To keep the system from jamming, flush the water pipe before installation. Operating conditions: Working pressure at 0.05-1.
2 Point Shower System (EMBY-SHS-T2) 1. 2. 3. 4. 5. 6. 7. 8. 9. 2 Flange cover Shower arm Top spray shower Wall valve body Faceplate Sleeve Washer Tooth Screw 10. Handle 11. Handle 12. Flange cover 13. Angle valve 14. Shower rail 15. Shower handle 16.
2 Point Shower System (EMBY-SHS-T2) ζੋ҉स && ࢺ ܜ ۜ ࢺ ܜ (0%< 6+6 7 &+ PP ,Q PP ,Q PP ,Q PP ,Q PP ,Q PP ,Q 0$; 0,1 PP ,Q PP ,Q ۜ PP ,Q PP ,Q PP ,Q ы ༉ৃޚ؟ ҉ ஆ ఐ γޚ ༉ৃޚ؟ ҉ ஆ ఐ ၕ ัۺܰঅ ͑ ұ $ ᄥ Α ै ಌ ۢ Ӧ ส PP ۢ ᅹ -XQQ\ ഃ ᄍ ၗ 3 -XO
2 Point Shower System (EMBY-SHS-T2) Tools: Time required: Wrench Screwdriver +/- 120 minutes Drill Legend: 4 Hot Water Cold Water Warning Plumber’s Tape Torch
2 Point Shower System (EMBY-SHS-T2) Slide the sleeves onto the pipes and then insert pipes into the wall valve. Tighten the ring around the pipes with the wrench.
2 Point Shower System (EMBY-SHS-T2) Weld the copper together or use plumber’s tape to prevent leaks.
2 Point Shower System (EMBY-SHS-T2) After welding, purge the water supply system for 30 seconds.
2 Point Shower System (EMBY-SHS-T2) Reinstall the valve components into their original positions.
2 Point Shower System (EMBY-SHS-T2) Use this diagram to understand the placement of the wall valve.
2 Point Shower System (EMBY-SHS-T2) Screw the wall valve body into the system with a screwdriver. Do not overtighten.
2 Point Shower System (EMBY-SHS-T2) Screw the sleeve and washer into the wall valve body.
2 Point Shower System (EMBY-SHS-T2) Attach the faceplate and remove the plastic.
2 Point Shower System (EMBY-SHS-T2) Connect the flange cover to the spout in the wall. Secure with plumber’s tape to prevent leaks.
2 Point Shower System (EMBY-SHS-T2) Twist the top spray shower into the shower arm.
2 Point Shower System (EMBY-SHS-T2) Connect the angle valve to the flange cover and screw together. Secure with plumber’s tape to prevent leaks.
2 Point Shower System (EMBY-SHS-T2) Make sure the shower bar is aligned vertically before installing the top anchor.
2 Point Shower System (EMBY-SHS-T2) Secure the mounting brackets into place.
2 Point Shower System (EMBY-SHS-T2) Connect the components of the shower rail.
2 Point Shower System (EMBY-SHS-T2) Connect the shower handle to the shower rail. Tighten with a wrench.
2 Point Shower System (EMBY-SHS-T2) Review the diagram to understand the hot, cold, and open settings.
3 Point Shower System (EMBY-SHS-T3) 1. 2. 3. 4. 5. 6. 7. 8. 9. Flange cover Shower arm Top spray shower Wall valve body Faceplate Sleeve Washer Tooth Screw 10. Handle 11. Handle 12. Flange cover 13. Angle valve 14. Shower rail 15. Shower handle 16. Hose 17.
3 Point Shower System (EMBY-SHS-T3) ۜ ζੋ҉स && ࢺ ܜ ۜ ࢺ ܜ (0%< 6+6 7 &+ PP ,Q PP ,Q PP ,Q PP ,Q PP ,Q 0$; 0,1 PP ,Q PP ,Q PP ,Q PP ,Q PP ,Q PP ,Q PP ,Q ы γޚ 22 ༉ৃޚ؟ ҉ ஆ ఐ γޚ ༉ৃޚ؟ ҉ ஆ ఐ ၕ ัۺܰঅ၄ ͑ ұ $ ᄥ Α ै ಌ ۢ Ӧ ส PP ۢ ᅹ -XQQ\ ഃ ᄍ ၗ -XO
3 Point Shower System (EMBY-SHS-T3) Tools: Time required: Wrench Screwdriver +/- 120 minutes Drill Legend: Hot Water Cold Water Warning Plumber’s Tape Torch 23
3 Point Shower System (EMBY-SHS-T3) Slide the sleeves onto the pipes and then insert pipes into the wall valve. Tighten the ring around the pipes with the wrench.
3 Point Shower System (EMBY-SHS-T3) Weld the copper together or use plumber’s tape to prevent leaks.
3 Point Shower System (EMBY-SHS-T3) After welding, purge the water supply system for 30 seconds.
3 Point Shower System (EMBY-SHS-T3) Reinstall the valve components into their original positions.
3 Point Shower System (EMBY-SHS-T3) Use this diagram to understand the placement of the wall valve.
3 Point Shower System (EMBY-SHS-T3) Screw the wall valve body into the system with a screwdriver. Do not overtighten.
3 Point Shower System (EMBY-SHS-T3) Screw the sleeve and washer into the wall valve body.
3 Point Shower System (EMBY-SHS-T3) Attach the faceplate and remove the plastic.
3 Point Shower System (EMBY-SHS-T3) Connect the flange cover to the spout in the wall. Secure with plumber’s tape to prevent leaks.
3 Point Shower System (EMBY-SHS-T3) Twist the top spray shower into the shower arm.
3 Point Shower System (EMBY-SHS-T3) Connect the angle valve to the flange cover and screw together. Secure with plumber’s tape to prevent leaks.
3 Point Shower System (EMBY-SHS-T3) Make sure the shower bar is aligned vertically before installing the top anchor.
3 Point Shower System (EMBY-SHS-T3) Secure the mounting brackets into place.
3 Point Shower System (EMBY-SHS-T3) Connect the components of the shower rail.
3 Point Shower System (EMBY-SHS-T3) Connect the shower handle to the shower rail. Tighten with a wrench.
3 Point Shower System (EMBY-SHS-T3) Connect the components of the shower rail.
3 Point Shower System (EMBY-SHS-T3) Secure the body jet base with the hex key.
3 Point Shower System (EMBY-SHS-T3) Use this diagram to understand how the body jet components to understand how they fit together.
3 Point Shower System (EMBY-SHS-T3) Secure the body jet components into place with the set screws.
3 Point Shower System (EMBY-SHS-T3) Secure the front plate with the set screw.
3 Point Shower System (EMBY-SHS-T3) Snap the front of the body jet into place.
3 Point Shower System (EMBY-SHS-T3) Repeat for each body jet.
3 Point Shower System (EMBY-SHS-T3) 100 .4°F 100.4°F Use a thermometer to calibrate the cartridge. Make sure the water temperature is 100.4°F.
3 Point Shower System (EMBY-SHS-T3) Review the diagram to understand the settings.
Troubleshooting Problem Possible Cause Solution There is leakage under the The locking nut has Unscrew the lever on the handle. come loose. handle by hand. Loosen set screw with a hex wrench. Remove the handle and unscrew trim cap by hand. Tighten locking nut with an adjustable wrench. Water will not shut off Cartridge may be Unscrew the level on the completely. defective. handle by hand. Loosen set screw with a hex wrench. Remove the handle and unscrew trim cap by hand.
Three Locations: 350 Parr Circle Reno, NV 89512 916 Delaware Avenue Marysville, OH 43040 427 Rowland Mill Road Bruceton, TN 38317 www.zlinekitchen.com 1-614-777-5004 1.0.
