Installation Guide

19 20

Step 1: Pressure Regulator

The pressure regulator supplied with the appliance is a convertible type pressure

regulator for use with Natural Gas at a nominal outlet pressure of 4˝ w.c. or LP gas

at a nominal outlet pressure of 11” w.c. and it is pre-assembled from the factory

to operate with one of these gas pressure as indicated in the labels afﬁxed on the

appliance, package and instruction booklet.

To convert the regulator for use with other liquid propane LP gas:

1. Unscrew the upper cap of the regulator, reverse its direction, and screw it in ﬁrmly

against the cap.

2. Screw the metal cap, by hand, in the original position on the regulator.

Gas Conversion Procedure

5/8

Reverse regulator

screw and spring.

Gas Conversion Procedure

Step 2: Surface Burners

To replace the nozzles of the surface burners, lift up the burners and unscrew the

nozzles shipped with the range using a 7 mm (socket wrench).

Replace nozzles using the conversion set supplied with the range. Each nozzle has a

number indicating its ﬂow diameter printed on the body. Consult the table on page

18 for matching nozzles to burners.

NG = Natural Gas

LPG = Liquid Propane Gas

NG LPG

9/32

Step1

Step 2

Step 3

Step 4

Step 5

Gas Conversion Procedure