Use and Care Guide

1
The installer and/or user must read, understand and follow these instructions before
installing the product. This product must be properly installed before it is used. If
instructions are not followed, the manufacturer will not be held responsible for any
problems or product malfunction. Failure to follow installation and/or operating
instructions voids the warranty.
We recommend that this product be installed by a certified plumber. In some states
or provinces, it is a legal requirement for this type of product to be installed by a
certified plumber, according to the plumbing and building codes effective in the
region where the sink is used.
Shut off the water valves before installing the sink or doing any maintenance.
Open the sink packaging and verify that the sink is in perfect condition. Put the sink
back in its packaging to protect it until time of installation.
To replace a sink, ensure that the hole in the counter is adequate.
If you have a sink with 1/8” overhang, the enclosed cutout template will create an
overhang of approximately 1/8”. It is recommended that you discuss this with your
customer and agree that this finished appearance is the desired effect. Zline is not
responsible for improper sink or countertop installations. Due to the aesthtic qualities
of the converging bowl radii, the template furnished with each sink provides the only
opening recommended for intsalltion of undermount sinks. See illustration below.
Safety Instructions