Use and Care Guide
16
Designer Wall Range Hood Installation
Step 8
Find the center of the wall where you are installing the hood. Make sure there is
sufficient bracing to hold the weight of the hood. Mark your center line and measure
out from the center to find your two mounting points. Make sure your mounting points
are level when you mark them. It is recommended to install the hood directly into
wood supports. Figure 7
Step 9
Mark the mounting points and install the two mounting screws provided leaving the
heads out ¼˝ to mount the hood. Figure 8
Step 10
Mount the main body of the hood to the two screws and screw into place. Figure 9
Figure 7
Figure 8
Figure 9