Use and Care Guide

Replace or Change Transformer:

1. Remove the screws from the transformer.

2. Remove the two connections to the lights.

3. Remove the two wired connections from the circuit board (you must remove the

circuit board cover).

4. Install the new connections from your new transformer (be certain the correct wires

are connected).

5. Reinstall the cover for the circuit board with screws.

6. Replace all screws in the transformer.

7. Reconnect the lights to the transformer.

Note: On units made before 2017 with three or more lights, there will be dual

transformers.

Note: Never work on or clean the range hood while power is ON. Always unplug

the unit or switch the electrical breaker to the off position.

How to Change Parts

Installation Tutorial Video