Installation Guide

6 7
Step 5
Install the transition piece securing it with the screws provided. Figure 4
Step 6
Make your electrical and ducting connections. Try and minimize the use of elbows.
More elbows and longer runs create higher static pressure. The hood comes with a
grounded three prong plug that can either be direct wire or plugged into a 20 amp
circuit. Figure 5
Step 7
Connect the ducting to the transition piece using a ring to hold it into place. Attach the
ducting to the range hood. Figure 6
The recommended height to install your hood is 30˝ minimum and 36˝ maximum
above the cooktop.
For Outdoor (304 Series) hood installation, the unit must be installed at a minimum of
36˝ above the grill.
Step 1
Find the center of the wall where you are installing the hood. Make sure there is
sufficient bracing to hold the weight of the hood. Mark your center line and measure
out from the center to find your two mounting points. Make sure your mounting points
are level when you mark them. It is recommended to install the hood directly into
wood supports. Figure 1
Step 2
Mark the mounting points and install the two mounting screws provided leaving the
heads out ¼˝ to mount the hood. Figure 1
Step 3
Mount the main body of the hood to the two screws and screw into place. Figure 2
Step 4
Mount the top chimney mounting bracket centering it above the hood. Figure 3
Wall Range Hood Installation Wall Range Hood Installation
Figure 3Figure 1
Figure 2
C
D
Figure 4
Figure 6Figure 5