Use and Care Guide

38
How to Change Parts
Change/Replace Capacitor:
1. Remove screws from the circuit board cover.
2. Remove screws from compactor.
3. Remove both wired connections from the capacitor.
4. Connect new capacitor with wire connectors.
5. Replace screws in cover.
6. Repeat operation if dual motor.
Note: Some units have more than one motor. If you have a unit with dual motors,
there will be two capacitors.
Note: Never work on or clean the range hood while power is ON. Always unplug
the unit or switch the electrical breaker to the off position.
Installation
Tutorial
Video