Installation Guide

using the cooktop

RESIDUAL HEAT INDICATOR

• After using the cooktop, the cooking area will remain hot for a few minutes. The

digital display will show an “H” to warn the user that the surface is hot to touch.

Wait until the “H” is no longer displayed to clean the unit. You may turn the

cooktop on even if the “H” is displayed.

ONLY FOR 24” MODEL (RCIND-24)

STOP/GO

•Use the Stop/Go function to ‘Pause’ the cooktop for Max. 10 minutes

while cooking; the unit will be automatically switched off if Stop/Go is

not touched again within 10 minutes.

TO TURN ON

•If one or more cooking zones are active, touch Stop/Go key pad. A

“beep” will sound, the indicator light above the Stop/Go will be lit up,

and all active digital displays of the cooktop will blink. Any set cooking

timers will stop. When “Stop and Go” is deactivated, the countdown will

continue.

•If all of the buttons are inactive except for Stop/Go, Lock, ON/OFF

and POWER key and no keys are touched within 10 minutes, all of the

active cooking zones are automatically switched off.

TO TURN OFF

•Touch Stop/Go key again within 10 minutes. The indicator light above

Stop/Go button will turn off and the cooktop continues with the settings

that were set before the Stop / Go.