Use and Care Guide

22
Final Preparation
All stainless steel body parts should be wiped with hot, soapy water and with a
stainless steel cleanser.
If build-up occurs, do not use steel wool, abrasive cloths, cleaners, or powders. If it is
necessary to scrape stainless steel to remove encrusted materials, soak with hot, wet
cloths to loosen the material, and then use a wood or nylon scraper. DO NOT use
a metal knife, or any other metal tool to scrape stainless steel! Scratches are almost
impossible to remove.
Before using the oven for food preparation, clean thoroughly with a warm soap and
water solution to remove film residues and any dust or debris from installation, then
rinse and wipe dry.