Manualshelf

Owners Guide

ManualsBrandsZLINE ManualsCooking AppliancesShiplap Wooden Wall Range Hood with 4-Speed Motor, Stainless Steel Baffle Filters, LED Lighting, Delayed Shut Off, and Stainless Steel Accent in Paneled Birch Wood Grain: 36" Width (1200 CFM)
41424344454647484950
34
How to Change Parts
How to Replace the Circuit Board:
1. Turn the power off at the breaker and unplug the Range Hood.
2. Remove all screws from the top of the circuit board cover.
3. Take a picture of the wiring layout (this will help you put the circuit board back
together properly).
4. Remove the wiring connected to the circuit board.
5. Remove the screws from the circuit board.
6. Replace the wiring and screws to reassemble the new circuit board per the
diagram below.
Note: Never work on or clean the range hood while power is ON. Always unplug
the unit or switch the electrical breaker to the off position.
Installation Tutorial Video