Installation amd User Manual

20 21

Under-Cab Rear Ducting ConversionUnder cabinet Installation

Step 5

Draw electrical wires through cabinet access opening, center the hood beneath the

cabinet.

Step 6

Align hood-mounting

brackets to the screws on

the wall and hook hood

into place. Tighten screws

to secure hood to the wall.

Step 7

Connect ducting.

If you need to convert your under cabinet range hood to rear ducting please follow

the instructions below. Please note that converting the

undercab to rear ducting is a modiﬁcation of the standard

hood and part of the installation process. It is recomended

that the hood is inspected before this procedure. If you are

uncomfortable doing this process on your own, you can

have our team professionally do it for a $50 fee* prior

to shipping.

Step 1

First remove the screws from the stainless steel panel. The

small screws attach the panel to the range hood while the

larger screws attach the panel to the motor.

Step 2

Remove the panel from the hood

Step 3

Remove the blower/motor from the range hood. Be careful

not to pull and disconnect the attached wiring.

Step 4

Rotate the blower/motor so that the opening is facing out

the rear of the range hood.

Step 5

Replace the panel so that the opening aligns with the

opening of the blower/motor.

Step 6

Attach the panel to the range hood then attach the

blower/motor to the panel using the larger screws.