Installation Sheet

4140

Changing the Capacitor

Changing Bafﬂe Filters

BAFFLE FILTER

The bafﬂe ﬁlter is equipped with a knob. To remove from the hood, pull back toward

the wall and down.

CHANGING PARTS

CHANGE/REPLACE CAPACITOR:

1. Remove screws from the circuit board cover.

2. Remove screws from compactor.

3. Remove both wired connections from the capacitor.

4. Connect new capacitor with wire connectors.

5. Replace screws in cover.

6. Repeat operation if dual motor.

NOTE: Some units have more than one motor. If you have a unit with dual motors,

there will be two capacitors.

NOTE: Never work on or clean the range hood while power is ON. Always unplug

the unit or switch the electrical breaker to the off position.

CHANGING PARTS

Installation

Tutorial

Video

ground

Release

Scan Me