Installation and User Guide

34 35
Replace or Change Transformer:
1. Remove the screws from the transformer.
2. Remove the two connections to the lights.
3. Remove the two wired connections from the circuit board (you must remove the
circuit board cover).
4. Install the new connections from your new transformer (be certain the correct wires
are connected).
5. Reinstall the cover for the circuit board with screws.
6. Replace all screws in the transformer.
7. Reconnect the lights to the transformer.
Note: On Units with three or more lights, there will be dual transformers.
Note: Never work on or clean the range hood while power is ON. Always unplug
the unit or swtich the electrical breaker to the off position.
How to Change Parts
How to Clean, Install, or Replace the Grease Cup:
A removable grease cup is provided to catch any excess greatse at the bottom of the
motor. Remove it every 2 to 3 months, wash it, then re-install it.
Note: Never work on or clean the range hood while power is ON. Always unplug
the unit or swtich the electrical breaker to the off position.
Installation Tutorial Video
How to Change Parts
Installation Tutorial Video