Manualshelf

Owners Guide

ManualsBrandsZLINE ManualsCooking AppliancesIsland Mount Range Hood with 4 Speed 400 CFM Motor, Push Button Control Panel, Directional LED Lights, Stainless Steel Baffle Filters, Delayed Shutoff, and DuraSnow® Stainless Steel Construction: 36" Width
31323334353637383940
33
Remote Blower Installation
When installing your new remote blower type range hood, follow the instructions for
the type of hood you are installing. Remote blowers are available with wall, island,
under cabinet, and insert range hoods.
Make certain to connect the electrical cord to the hood and plug the blower motor in
to test the unit.
1. Run duct work into the area that you will install the remote from your range hood.
2. Fasten ducting to the range hood using a hose clamp and silver/duct tape.
3. Use the least amount of elbows as possible.
4. Mount the remote blower to studs only.
5. Run electrical cord (provided) back to the range hood.
6. Install a regular outlet with a 20 amp circuit.
7. The hood comes with a grounded 3 prong grounded plug.
8. Run duct work to the outside of the house and add a back draft damper outside.
NOTE: The remote blower must be kept
inside the home, attic, or crawl space etc.
Never try to install a remote blower outside
of the home.
REMOTE BLOWER INSTALLATION