Installation Guide and Users Manual

Gather the required tools before starting installation. Read and follow the instructions

provided with any tools listed here.

TOOLS NEEDED

• Measuring Tape

• Straightedge

• Pencil

• Phillips Screwdriver

• Level

• Wire Cutters and Wire Stripper

• Hand or Sabre Saw

• 1” Hole Saw

• Cordless Drill and Drill Bit

• Safety Gloves and Goggles

• Volt Meter (0-250VAC)

PARTS NEEDED

• UL Listed Conduit Connector

• UL Listed Wire Connectors

PARTS PROVIDED

• #8-14 x 1” Screws - 4

PARTS AND TOOLS