T allac D ishwashers Installation Guide and Users Manual
SCAN ME REGISTERING YOUR PRODUCT ZLINE Kitchen and Bath provides Attainable Luxury, where the kitchen and bath of your Please register your ZLINE appliance. Begin the simple registration process by dreams is never out of reach. Through our unique designs and unparalleled quality, we’re scanning the QR code. dedicated to providing you an elevated experience in the heart of your home. With an endless selection of features and finishes, our inspiration is your reality.
WARRANTY COVERAGE ZLINE Kitchen and Bath dishwashers parts will be warrantied for one year from the original purchase date for the original purchaser of the product. TERMS This warranty applies only to the original purchaser of the product installed for normal residential use. This is defined as a single-family, residential dwelling in a non-commercial setting.
TABLE OF CONTENTS SAFETY INSTRUCTIONS 1 SAFETY INSTRUCTIONS To prevent accidents, which could cause serious injury or death, as well as dishwasher damage, read these instructions before installation and/or use. BEFORE INSTALLATION 6 Electric Shock Hazard When using the dishwasher, carefully follow the precautions in this manual. These Tools and Parts are provided in order to save time and effort and to help ensure optimum dishwasher Enclosure Dimensions performance.
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS • Dishwasher must be secured to adjacent cabinetry using the brackets provided. Read these installation instructions completely before installing and follow them carefully. Save these installation instructions and pass them on to any future user. Failure to do this may cause damage to property or bodily injury. • Ensure that any plastic wrappings, bags, small pieces etc. are disposed of safely and kept out of the reach of children.
SAFETY INSTRUCTIONS SAFETY INSTRUCTIONS • Do not store or use flammable liquids or vapors in the area of the dishwasher, • When loading items to be washed: • Locate sharp items so that they are not likely to damage the door seal. • Load sharp knives with the handles up to reduce the risk of type injuries. • Do not wash plastic items unless they are marked “dishwasher safe”or the equivalent. For plastic items not marked, check the manufacturer’s recommendations. near or on the appliance.
BEFORE INSTALLATION BEFORE INSTALLATION Tools which may be needed: WARNING • Connect to a properly rated, protected, and sized power supply circuit to avoid electrical overload.
BEFORE INSTALLATION BEFORE INSTALLATION The parts required for positioning the dishwasher are in plastic bags. Check that all of the 18” following parts are contained in plastic bags. MANUAL BAG The dishwasher comes with a manual bag containing the product manual. DISHWASHER PARTS BAG 1 a. Test Strip a. b. Hose Clamp b. DISHWASHER PARTS BAG 2 c. c. Mounted plan d. d. Steam Protection Foil e. e. Side Trim Strips (Left) f. f. Side Trim Strips (Right) g. g. Door Fixing Strips h. h.
INSTALLATION installing the dishwasher INSTALLATION The mounting brackets in the plastic bag should be used when the dishwasher is ADJUSTING HEIGHT installed in the cabinetry. Use of any parts other than mounting brackets may result in 1. damage to property or bodily injury. Before the dishwasher is placed into the cabinetry, the front legs will be completely retracted. Place into the cabinetry. 2.
INSTALLATION INSTALLATION installing the dishwasher 24” WATER SUPPLY CONNECTION If the height of the enclosure is 33 7/8” to 35 7/8”, use short supports as shown in Water supply may be connected to the dishwasher in one of two ways: the figure. • With metal braided hose. • With copper tubing Braided Hose/Copper Tubing • After connections are made, turn on the water supply to check for leaks. • Hot water supply line: Use minimum 3/4” O.D. copper tubing or metal braided dishwasher supply line.
INSTALLATION INSTALLATION STEAM PROTECTION FOIL PLACEMENT OF DISHWASHER INTO THE OPENING Steam will be output when the dishwasher door is opened during the operation of Now, place the dishwasher into the opening and get ready to connect all hoses and the dishwasher and after completion of the working cycle. In order to prevent the electrical connections.
INSTALLATION INSTALLATION DRAIN HOSE CONNECTION 3. Check the size of the sink’s drain hose connector. If needed, cut the drain hose so 1. Check the parts on the sink to which the drain hose will be connected. its end fits onto the sink connector (5/8", 3/4", or 1" - as shown below). If the 2. There are several ways to insert the drain hose into the drain hose connector of end of the drain hose does not fit onto the drain hose connector of the sink, use the sink, as shown in the following figures.
INSTALLATION installing the dishwasher 5. INSTALLATION installing the dishwasher If there is no air gap, make sure to hang the middle of the drain hose well above ADJUSTING THE KICK PLATE the sink cabinet base to prevent back flow. Now that the dishwasher is successfully installed, attach the kick plate to the dishwasher. The two piece kick plate can be adjusted to the height and depth needed Dishwasher Sink for the kitchen. Drain Hose 18” 1.
INSTALLATION 3. INSTALLATION As shown below, the cylindrical feet of the adjustable plinth are attached to the INSTALLER CHECKLIST plinth fixing metal parts and shifted through the cavity of the part. The installer must have completed and checked the following: • The dishwasher is square and level. • The dishwasher is fastened securely to the cabinetry. • The dishwasher door opens and closes freely. The dishwasher door must close without hitting any cabinetry or counter top.
3 7 11 10 OPERATION (18") Electrical connection (volts), 12 A (amps), 60Hz (hertz) 10 OPERATION (24") 8 9 Total power 8 9 1400 (W) 5 5 Heater power 6 1 12 1100 (W) 13 3 1 12 2 13 14 13 NOTICE: Because we continually strive to improve our products, we may change our specifications and design without prior notice. This device corresponds to the following directives: UL 7494 Household Dishwasher directive. 4.1. General Appearance 4 6 11 11 2 14 13 3 4.1.
OPERATION BEFORE USING THE APPLIANCE OPERATION MAINTENANCE INFORMATION 1. When the dishwasher isn’t in operation: Preparing The Dishwasher For First Use • Disconnect the plug and close the tap. • Make sure the electricity and supply water specifications match the values • Leave the door slightly open to prevent odor formation. indicated in the installation instructions for the dishwasher. • Open the door of the dishwasher. 2. Select the dry option to remove water droplets. 3.
OPERATION OPERATION TEST STRIP SALT INDICATOR The washing effectiveness of your dishwasher depends on the softness of the tap Please check the salt indicator on the control panel to see whether there is adequate water. For this reason, the dishwasher is equipped with a system that reduces the amount of softening salt in the dishwasher or not. Refill the salt reservoir with salt Test Strip For Models With Water Softener hardness in the main water supply.
contact detergent manufacturers directly. WARNING: Use a detergent specifically designed for use in domestic dishwashers. OPERATION Check that the detergent dispenser is empty after the completion of each wash program OPERATION You can find powder, gel,and tablet detergents in the market that have been 5.6. Filling The Detergent designed for household dishwashers. Detergent should be put into the DETERGENT USAGE FILLING THE DETERGENT compartment prior to starting the machine.
OPERATION OPERATION Using Combined Detergents • Detergent manufacturers also manufacture combined detergents that are called CAUTION: Solubility of the tablet detergents produced by different CAUTION 2 in 1, 3 in 1, 5 in 1, etc. companies can vary depending on the temperature and time. Therefore, it is not recommended to use such detergents in short programs. It is more • The 2 in1 detergents contain detergent salt or rinse aid.
NOTE: When the Rinse Aid indicator lights up, the rinse aid reservoir contains sufficient rinse aid for 2 - 3 programs only. When using “Tab” detergents rinse aid is OPERATION not needed. 5.9 Filling The Rinse-aid and Setting FILLING THE RINSE-AID AND SETTING 1. the display, the machine will display the last setting, 5. The amount of rinse aid is adjusted by pressing “Program Selection + Cancel” key, 6.
OPERATION You are recommended to use the cutlery grid in order to obtain the best result. To avoid any possible injuries, always place such long-handle and sharp-pointed dishes as serving fork, bread knife etc. with their sharp points facing down or horizontally on the baskets. NOTE: Do not overload the dishwasher and pay attention to manufacturer WARNING: Place your dishes into your instructions regarding which dishes are appropriate for use in amachine dishwasher.
OPERATION (18”) TION (24”) OPERA 6.1 Upper Rack 6.2. Lower Rack Load the upper rack with dessert plates, You can load into the lower basket such round and deep items as pots with long Top rack load pot pattern 10 place handles, lids,for plates, saladsettings. plates, Load the upper rack with dessert plates, cups, glasses etc. cutlery sets. The lower rack should not be used for small items such as cups, wine glasses. 6.3. IncorrectLOADS Loads INCORRECT cups, glasses UPPER RACK etc.
1 OPERATION (24”) 6.2. Lower Rack plates, You can RACK load into the lower basket such LOWER round and deep items as pots with long 2 3 4 5 6 1 Cutlery Basket load pattern for 8 place settings . Load the upper rack with dessert plates, cups, glasses etc. settings. Bottom rack load patterns for 12 place settings. NOTE: Place all large and very dirty items in the lower rack.
Upper Cutlery Basket Upper Basket ( ModelCutlery Depending ) ( Model Depending ) OPERATION The upper cutlery basket is designed for the The upper cutlery is designed for the placement of largebasket and small cutlery and The upper cutlery basket is designed for the of large placement of large andplacement small cutlery and and small cutlery and utensils. utensils. utensils. Top Basket OPERATION Rack with height adjustment TOP BASKET These racks are designed to increase the capacity of top basket.
OPERATION OPERATION 2) Height setting - when basket is filled ( model depending ) Top Basket The upper basket includes a mechanism which enables the height of the basket to be adjusted up (1) or down (2) without having to remove the basket. Hold the basket on both sides and pull it up or push it down, ensuring both sides of the upper basket are in the same position.
the upper rack may be changed using the In certain models, the height setting of wheels which are present at two height the upper rack may be changed using the levels. wheels which are present at two height levels. CAUTION: Make sure that OPERATION C C the rack is empty. Changing CAUTION: Make sure the height setting whilethat the the rack is empty. Changing rack contains tableware HEIGHT SETTING (WHEN BASKET EMPTY): the height setting while IS theto could cause the contents 4.
OPERATION OPERATION he program duration may ding to the amount of dishes, perature, the ambient and selected additional 18" he energy-usage label is “Regular” program. This e most efficient in terms of its ergy and water consumption at mally soiled dishes. wder detergent for short ammes do not include drying. ying, we recommend slightly oor after a cycle is complete. erature eeded for best dishwashing sults. Water entering hould be at least 120°F (49°C) ctory results.
OPERATION OPERATION Programs PROGRAM SELECTION 1. Press the On/Off key to turn on the dishwasher. Note that the door of the Regular dishwasher is OPEN position. 2. Refer to the “Programs Table” to determine a washing program suitable for the dishes. 3. Auto Press program selection key until the number of the program selected appears on • In order to start the selected program, Start/Pause key must be pressed and the 18” the display.
Intensive Plus Intensive 165 Plus Suitable Intensive for165 heavily Plus Suitable soiled Intensive dishes for165 Plus heavily that are Suitable soiled keptdishes waiting. for 165 heavily that Suitable are soiled keptdishes for waiting. heavily that are soiled kept dishes waiting. that are kept waiting. Auto Auto Auto Auto Clean 105 Clean 105 Clean 105 Clean 105 of water,Rinse therinse energy of consumption water, the energy and of consumption water, program the duration.
OPERATION OPERATION SANITIZE OPTION PROGRAMMING THE WASHING TIME Sanitize function raises the water temperature in the final rinse. Delay Timer • At the end of a successful sanitization, “00” is displayed on the display. If an economical electricity tariff is applied in the region, use the Delay Timer function to wash dishes during appropriate hours. The start of the selected program can be HI-TEMP OPTION delayed until 19 hours. Delay Timer cannot be set after the program starts.
OPERATION OPERATION TO CANCEL THE DELAY TIMER FUNCTION SALT INDICATOR 1. Open the door of the dishwasher. Please check the salt indicator on the control panel to see whether there is adequate 2. Press and hold Delay Timer key for 3 seconds. amount of softening salt in the dishwasher or not. Refill the salt reservoir with salt 3. At the end of 3 seconds, delaying process will be canceled. whenever salt warning indicator appears on the control panel of the dishwasher.
MAINTENANCE AND CLEANING MAINTENANCE AND CLEANING WARNING : Before cleaning or carrying out maintenance, switch off the WARNING appliance, disconnect the main plug and turn off the water tap. The dishwasher can only be repaired by an authorized service agent. Do not try to repair the dishwasher unless any recommendation by this manual. WARNING : All surfaces are susceptible to scratching. Contact with WARNING unsuitable cleaning agents can alter or discolor all surfaces.
MAINTENANCE AND CLEANING MAINTENANCE AND CLEANING UPPER IMPELLER 9.2. Cleaning The Impellers Upper Impeller Check if the holes on the upper impeller Clean the impellers at least once a week in Clean the impellers at least once a week in order for the dishwasher operates Check if the holes on the upper impeller (1) are clogged. If they are clogged, remove order for the machine operates efficiently. 1 are clogged. If they are clogged, remove UPPER IMPELLER 9.2.
TROUBLESHOOTING TROUBLESHOOTING ZLINE Customer Service is available at 1-614-777-5004. FAULT POSSIBLE FAULT FF POSSIBLE FAULT Water inlet system failure The screen does not come on. WHAT TO DO Make sure the water inlet tap is open and water is flowing. The program does not start. Separate the inlet hose from the tap and clean the filter of the hose. Contact customer service if the error continues. F5 Pressure system failure Contact customer service.
TROUBLESHOOTING Troubleshooting FAULT 62 POSSIBLE CAUSE TROUBLESHOOTING Shaking and hitting noises are heard during a wash operation. The spray arm is hitting the dishes in the lower basket. Move or remove items blocking the spray arm. Partial food wastes remain on the dishes. Dishes placed incorrectly, sprayed water not reaching affected dishes. Do not overload baskets. Dishes leaning on each another. Place dishes as instructed in the section on loading your dishwasher.
Installation Guide and User Manual 1.3.1 1-614-777-5004 contact@zlinekitchen.com www.zlinekitchen.
