Manualshelf

Installation Guide

ManualsBrandsZLINE ManualsCooking AppliancesIsland Mount Glass Canopy Range Hood with 4-Speed 400 CFM Blower, Dishwasher Safe Stainless Steel Baffle Filters, Backdraft Damper, Directional LEDs, and Delayed Shut Off: 30" in Stainless Steel
31323334353637383940
How To Replace the Circuit Board:
NOTE: Never work on or clean the range hood while power is ON!
Always unplug the unit or switch the electrical breaker to the off position.
Turn the power off at the breaker and unplug the Range Hood.
Remove all screws from the top of the circuit board cover.
Take a picture of the wiring layout (This will help you put the circuit board back together properly).
Remove the wiring connected to the circuit board.
Remove the screws form the circuit board.
Replace wiring and screws to reassemble the new circuit board per the diagram below.
1
4
2
5
3
6
30
How To Change or Replace Parts
Installation
Tutorial Video