Installation Guide

NOTE: Never work on or clean the range hood while power is ON!
Always unplug the unit or switch the electrical breaker to the off position.
NOTE: Some units have more than one motor. If you have a unit
with dual motors, there will be two capacitors.
Remove screws from the circuit board cover.
Remove screws from capacitor.
Remove both wired connections from the capacitor.
Connect new capacitor with wire connectors.
Replace screws in cover.
Repeat operation if dual motor.
Dual Motor Unit Capacitors
Dual Motor Unit Capacitors
Change / Replace Capacitor:
1
1
5
4
2
5
6
3
3
2
4
34
Filter Support Screws
Installation
Tutorial Video
How To Change or Replace Parts