Installation Guide
2
Read all instructions before installing and operating this appliance.
►e installation instructions in this manual is intended for qualied installers, service technicians or per-
sons with similar qualied background. Installation and electrical wiring must be done by qualied pro-
fessionals and in accordance with all applicable codes and standards, including rst-rated construction.
►DO NOT attempt to install this appliance yourself. Injury could result from installing the unit due to
lack of appropriate electrical and technical background.
►Range hood may have very sharp edges; please wear protective gloves if it is necessary to remove any
parts for installing, cleaning or servicing.
►Activating any switch ON before completing installation may cause ignition or an explosion.
►Due to the size and weight of this range hood, two people installation is recommended.
To reduce the risk of re, electric shock or injury to persons:
►For general ventilating use only. DO NOT use to exhaust hazardous or explosive materials and vapors.
►e combustion air ow needed for safe operation of fuel-burning equipment may be aected by this
unit’s operation. Follow the heating equipment manufacturer’s guideline and safety standards such as
those published by the National Fire Protection Association (NFPA), and the American Society of
Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code authorities.
►Before servicing or cleaning unit, switch power OFF at service panel and lock service panel to prevent
power from being switched ON accidentally.
►Ducted fans MUST ALWAYS be vented to the outdoors.
►Use only metal ductwork, and this unit MUST be grounded.
►Sucient air is needed for proper combustion and exhausting of gases through the duct to prevent
back draing.
►When cutting or drilling into a wall or ceiling, be careful not to damage electrical wiring or other
hidden utilities.
►All electrical wiring must be properly installed, insulated and grounded.
►Old duct work should be cleaned or replaced, if necessary, to avoid the possibility of a grease re.
►Check all joints on duct work to insure proper connection, all joints should be properly taped.
►Use this unit only in the manner intended by the manufacturer. If you have any questions, contact
the vendor.
►Keep all fans, bae, spaces, lter, grease tunnel, oil container and grease-laden surfaces clean. Grease
should not be allowed to accumulate on fan, bae, spaces, lter, grease tunnel or oil container.
►Clean grease-laden surfaces frequently. To reduce the risk of re and to disperse air properly, make sure to
vent air outside. DO NOT vent exhaust into spaces between walls, crawl spaces, ceilings, attics or garages.
►Always turn range hood ON when cooking at high heat or when cooking aming foods.
►Use high settings on cooking range only when necessary.
Important Safety Notice