T rim K it Installation Guide
ZLINE Kitchen and Bath provides Attainable Luxury, where the kitchen and bath of your dreams is never out of reach. Through our unique designs and unparalleled quality, we’re dedicated to providing you an elevated experience in the heart of your home. With an endless selection of features and finishes, our inspiration is your reality. ZLINE is fueled by a passion for innovation; A relentless pursuit of bringing the highest end luxury designs and professional features into everyone’s homes.
TABLE OF CONTENTS BEFORE INSTALLATION BEFORE INSTALLATION 1 TOOLS NEEDED: INSTALLATION 2 • Air screwdriver • Marker TOOLS INCLUDED: Support beam Front bracket Rear bracket Buckle seat Buckle Trim kit #1 Screw #2 Screw #3 Screw Tools 1
beam position.用记号笔根据前支架安装孔比对出支撑 横梁安装位置 ② Use 1# Screw fixing support beam 使用长螺丝垂直安装 INSTALLATION 1. INSTALLATION step 安装步骤 Install the三、Install support beams using the holes in ① theaccording front bracket a guide. Use to frontasbracket fixing holethe marker the support #1 screw. 三、Install step 安装步骤 3.
INSTALLATION INSTALLATION ① Insert the trim kit into the corresponding buckle seat 将 预装好外观框卡进对应卡扣座里 5. Push the microwave into the slot in the rear bracket by extending the support beam 7. Insert the trim kit into the corresponding buckle seat. ① Push the microwave which had install bracket into the slot in the rear bracket by extending the (Figure 1). support beam( picture 1)将预装好的微波炉顺延着支撑横梁推到后支架卡槽内为止（如图一） 6.② Use Use3#screw tothe fixfront the front andbeam( support beam (Figure 2).
1.0.0 Installation Guide and User Manual www.zlinekitchen.
