Installation Guide and Users Manual

46
operation
SETTING TWO-STAGE COOKING
For best results, some recipes call for different power levels during a cook cycle . You can
program your oven for two power level stages during the cooking cycle. Suppose you want
to set a 2-stage cook cycle. The first stage is a 3 minute cook time at 80% cook power then a
7 minute cook time at 50% cook power.
1. Press the numbers on the keypad to set cook time for the first stage. (ex: 3 minutes, press
3 0 0)
2. Press POWER LEVEL three times
3. Press the numbers on the keypad to set cook time for the second stage. (ex: 7 minutes,
press 7 0 0)
4. Press POWER LEVEL six times
5. Press START
SETTING CONTROL LOCK
1. Press CLOCK & SETTINGS two times to get to CONTROL LOCK
2. Press START
3. To turn off, touch the CLOCK & SETTINGS and touch START
SETTING POWER SAVE ON/OFF
1. Press CLOCK & SETTINGS three times to get to POWER SAVE OFF
2. Press START to toggle between ON & OFF
TURNING SOUND LOW/MED/HIGH/OFF
Audible signals are available to guide you when setting and using your oven.
• A programming tone will sound each time you touch a pad
• Three tones signal the end of a kitchen timer countdown
• Three tones signal the end of a cooking cycle
1. To adjust, press CLOCK & SETTINGS four times to get to VOLUME ON
2. Keep pressing to cycle through the options: ON, OFF, LOW, MED, HIGH
3. To set, press START