R angetops , C ooktops , & D ropins Installation Guide and Users Manual
Enjoy the versatility and high performance cooking power of ZLINE’s rangetop, cooktop, and dropin collections. No matter your kitchen needs, these collections offer four to seven burners in various finishes, sizes, and BTUs. Enjoy precise heat control through imported Italian burners combined with durable cast iron grills, both known for their even heat distribution and longevity. Made by hand and innovatively designed - allowing exploration for the love of food.
CONTENTS Installation Guide IMPORTANT SAFETY INSTRUCTIONS 1 WARRANTY AND SERVICE 3 BEFORE INSTALLATION 5 RANGETOP/DROPIN INSTALL INSTALLATION REQUIREMENTS 8 8 POWER RATING & ELECTRICAL CONNECTION 9 WIRING SCHEMATICS 10 GAS CONNECTION 13 GAS CONVERSION PROCEDURE 17 INSTALLATION CHECKLIST 20 FINAL PREPARATION 20
CONTENTS Users Manual ROOM VENTILATION 22 COOKTOP COOKING 23 MAINTAINING YOUR RANGE 25 TROUBLESHOOTING 26
Thank You We want to thank you for choosing one of our beautiful, professional ranges. We know that you have many brands to choose from and we are thrilled that you have decided to place one of our products in your home. Our appliances are designed according to the strictest safety and performance standards for the North American market. We follow the most advanced manufacturing process. Each appliance leaves the factory after thorough quality inspection and testing.
Location of Appliance Tags The rating tag shows the model and serial number of your range. The tag is located under the front edge of the range cooktop.
Important Safety Instructions An air curtain or other overhead range/cooktop hood which WARNING operates by blowing downward airflow onto the range, shall not be used/installed in conjunction with this gas range. The manufacturer will not be responsible for any damage to property or to persons caused by incorrect installation, improper use of the appliance, or failure to heed the warnings listed.
Important Safety Instructions Important Safety Information Please read and follow these important instructions for the safety of your home and the people living in it. If the information in this manual is not followed exactly, a fire or WARNING explosion may result causing property damage, personal injury, or death. Do not store or use gasoline or any other flammable substances in the vicinity of this or any other appliance. Never use this appliance as a space heater to heat or warm the WARNING room.
Warranty and Service Warranty and Service All range products carry a one year parts warranty and includes service, if required. Service on all products shall be carried out by industry professionals only. For warranty service, please call customer service. Replacement Parts Only authorized replacement parts may be used in performing service on this appliance. Replacement parts are available from ZLINE. Call 3 1-614-777-5004.
Product Dimensions Dropins: Cooktops: Cooktop cut outs: 4
Before Installation This appliance shall only be installed by an authorized professional. The appliance shall be installed in accordance with the standards of the country where it will be installed. The installation of this appliance must conform to local codes and ordinances. In the absence of local codes installation must conform to American National Standards, National fuel Gas code ANSI Z223.1-Latest edition/ NFPA 54 or B 149.1.
Before Installation Room Ventilation An exhaust fan may be used with the appliance; in each case it shall be installed in conformity with the appropriate national and local standards. Exhaust hood operation may affect other vented appliances; in each case it shall be installed in conformity with the appropriate national and local standards. Type of Gas This appliance is shipped from the factory for use with natural gas. For use with propane LP gas, please follow the conversion procedure described on pg.
Range Top/Dropin Installation Attaching the dropin To prevent liquids from accidentally leaking into the underlying storage space, the appliance is equipped with a special gasket. To apply this gasket, carefully follow the instructions in Fig. 1. Lay out the protective sealing strips along the edges of the opening in the bench top and carefully overlap the strip end. (See Fig. 1). insert the dropin into the bench top opening.
Installation Requirements A properly grounded and horizontally-mounted electrical receptacle type NEMA 1450R should be installed no higher than 3” above the floor, no less than 2” and not more than 8” from the left side (facing product); refer to electrical connection section. Gas An agency-approved, properly-sized manual shut-off valve should be installed no higher than 3” above the floor and no less than 2” and no more than 8” from the right side (facing product).
Power Rating & Electrical Connection The appliance shall be connected to a single phase electric line rated at 110-120Vac and 60Hz frequency. The true voltage in most homes is usually between these values. Electric Power Rating 110/120 Vac: 12A Max Electrical Grounding Our gas oven is equipped with a three-prong plug for your protection against shock hazard and should be plugged directly into a properly grounded receptacle. Do not cut or remove the prong from this plug.
Wiring Schematics RED WHITE BROWN GREEN RA30(RAB30-RAS30)电路图 Model: RC/RC-PBT-30 120/208 V Ac 60Hz 120/240 V Ac 60Hz (RIGHT) oven fan WIRE CONNECTOR SWITCH FOR THERMOSTAT Heat pipes-up (INSIDE1800/2395 W, OUTSIDE 650/865 W) GROUND WIRE IGNITION ALLUMAGE (LIFT) oven fan MICROSWITCH 1 SWITCH FOR ELECTRIC OVEN SNAP THERMOSTAT MICROSWITCH 2 SWITCH MICROSWITCH 3 白色 MICROSWITCH 4 Heat pipes-down 2000/2670W case fan (LIFT) LAMP SWITCH FOR LAMP (RIGHT) LAMP (LIFT) oven fan (RIGHT) oven fan WIRE
Wiring Schematics RED WHITE BROWN GREEN RA30(RAB30-RAS30)电路图 Model: RT/RTB/RTS-48 120/208 V Ac 60Hz 120/240 V Ac 60Hz (RIGHT) oven fan WIRE CONNECTOR SWITCH FOR THERMOSTAT Heat pipes-up (INSIDE1800/2395 W, OUTSIDE 650/865 W) GROUND WIRE IGNITION ALLUMAGE (LIFT) oven fan MICROSWITCH 1 SWITCH FOR ELECTRIC OVEN SNAP THERMOSTAT MICROSWITCH 2 SWITCH MICROSWITCH 3 白色 MICROSWITCH 4 Heat pipes-down 2000/2670W case fan 11 (LIFT) LAMP (RIGHT) LAMP SWITCH FOR LAMP
GAS CONNECTION All gas connections must comply with national and local codes. The gas supply line (service) must be the same size or greater than the inlet line of the appliance. This range uses a ½˝ NPT inlet. Use appropriate sealant on all pipe joints that are resistant to gas. This range can be used with Natural or LP/propane gas. The range is shipped from the factory for use with natural gas.
Gas Connection Manual Shut-Off Valve This valve is not shipped with the appliance and must be provided by the installer. The manual shut-off valve must be installed in the gas service line between the gas hook-up on the wall and the appliance inlet, in position where it can be reached quickly in the event of an emergency. In Massachusetts: A T handle type manual gas shut-off valve must be installed in the gas supply line to this appliance.
Gas Connection Pressure Regulator Since service pressure may fluctuate with local demand, every gas cooking appliance must be equipped with a pressure regulator on the incoming service line for safe and efficient operation. Pressure Regulator The pressure regulator shipped with the appliance has two female threads 34”NPT. The regulator shall be installed properly in order to be accessible when the appliance is installed in its final position.
Gas Connection procedure The gas conversion procedure for this range includes: 1. Pressure Regulator 2. Surface Burners 3. Flame Adjustment The conversion is not finished if all steps are not completed. Before performing the gas conversion, locate the package containing the replacement nozzles, which has a number indicating its flow diameter printed on the body. Consult the table below for matching nozzles to burners. Save the nozzles removed from the range for future use.
Gas Connection procedure 16
Gas Conversion Procedure Step 1: Pressure Regulator The pressure regulator supplied with the appliance is a convertible type pressure regulator for use with Natural Gas at a nominal outlet pressure of 4˝ w.c. or LP gas at a nominal outlet pressure of 11” w.c. and it is pre-assembled from the factory to operate with one of these gas pressure as indicated in the labels affixed on the appliance, package and instruction booklet. To convert the regulator for use with other liquid propane LP gas: 1.
Gas Conversion Procedure Step 2: Surface Burners To replace the nozzles of the surface burners, lift up the burners and unscrew the nozzles shipped with the range using a 7 mm (socket wrench). Replace nozzles using the conversion set supplied with the range. Each nozzle has a number indicating its flow diameter printed on the body. Consult the table on page 15 for matching nozzles to burners.
Gas Conversion Procedure Step 3: 1. Light one burner at a time and set it to the MINIMUM position (small flame). 2. Remove the knob. 3. The range is equipped with a safety valve. Using a small-size flathead screwdriver, locate the choke screw (see diagram below) and turn to the right or left until the burner flame is adjusted to desired minimum. 4. Make sure that the flame does not go out when switching quickly from the MAXIMUM to the MINIMUM position. The high flame setting cannot be adjusted to be lower.
Installation Checklist 1. Is the back guard securely connected? 2. Is the electricity properly grounded? 3. Is the gas service line connected following the directions of the manufacturer? 4. Have all the proper valves, stoppers, and gaskets been installed between the range and the service line? 5. Has the gas connection been checked for leaks? 6. Has the range been setup for the type of gas available in the household? (propane or natural gas) 7. Does the flame appear sharp blue with no yellow tipping? 8.
Users Manual 21
Room Ventilation The use of a gas cooking appliance generates heat and humidity in the room where it is installed. Proper ventilation in the room is needed. Make sure the kitchen is equipped with a range hood of appropriate power (400 CFM minimum). Activate the exhaust fan/range hood when possible. Intensive and continuous use of the appliance may require additional ventilation, for example, by opening a window.
COOKTOP COOKING Surface Burner Operation - Electric Ignition To activate the electric ignition, simply turn the control knob counter-clockwise to maximum power, then press the knob in to start the flow of gas and the ignition spark. The spark will be released at the metal tip of the white ceramic pin located on the side of the burner. Once the flame is on, release the control knob gently. If the flame turns off, simply repeat the above procedure.
COOKTOP COOKING Be sure to set all worktop/broiler burner controls to the OFF position after each use of the appliance. Symbols: Oven Functions Selector Cooktop Functions Selector OFF OFF Max 450 400 250 300 350 Maximum temperature setting/recommended control knob position for burner ignition.
Maintaining Your Range Cleaning Your Range During cleaning operation never move the appliance from its original installation position. Never use abrasive cleaners! Scratches on the WARNING stainless steel surfaces are permanent. Do NOT clean the range when hot! Cleaning after Installation: Use a stainless steel cleaning product or wipe to eliminate the glue residues of the protection film after removal.
Troubleshooting Problem Possible Cause and/or Remedy Range does not function Range is not connected to electrical power. Check power circuit breaker, wiring, and fuses. Igniter does not work Gas supply valve is in the “OFF” position or gas supply is interrupted. Igniter sparking taut; no flame ignition Burner ports are clogged or the unit is not set to the appropriate gas type. Call a technician to repair.
Kitchen and Bath Three Locations: 350 Parr Circle Reno, NV 89512 916 Delaware Avenue Marysville, OH 43040 319 Rowland Mill Road Bruceton, TN 38317 www.zlinekitchen.
