User Manual

9
Electrical Connection
BEFORE INSTALLATION
The induction cooktop must connect to a separate, grounded wire, single phase.
AC only electrical supply with their own circuit breaker. These appliances must be
installed in accordance with National Electrical Codes, as well as all state, municipal
and local codes. This appliance must be supplied with the proper voltage, frequency,
and amperage protected by a properly sized circuit breaker or time delay fuse.
3-WIRE CABLE FROM HOME POWER SUPPLY
• IMPORTANT: Use the 3-wire cable from Home Power Supply where local codes
permit a 3-wire connection
4-WIRE CABLE FROM HOME POWER SUPPLY
• IMPORTANT: Use the 3-wire cable from Home Power Supply where local codes
permit a 3-wire connection.
The cooktop conduit wiring is approved for copper wire connection only, if you have
aluminum house wiring, use only special connectors which are approved for joining
copper and aluminum wires conform with local codes and ordinances. Follow the
electrical connector manufacturer’s recommended procedure closely.