User Manual

Stop/Go

OPERATION

RESIDUAL HEAT INDICATOR

• After using the cooktop, the cooking area will remain hot for a few minutes. The

digital display will show an “H” to warn the user that the surface is hot to touch.

Wait until the “H” is no longer displayed to clean the unit. You may turn the

cooktop on even if the “H” is displayed.

ONLY FOR 24” MODEL (RCIND-24)

STOP/GO

Use the Stop/Go function to ‘Pause’ the cooktop for Max. 10 minutes while

cooking the unit will be automatically switched off if Stop/Go is not touched

again within 10 minutes.

TO TURN ON

• If one or more cooking zones are active, touch Stop/Go key pad. A “beep” will

sound, the indicator light above the Stop/Go will be lit up, and all active digital

displays of the cooktop will blink. Any set cooking timers will stop. When “Stop

and Go” is deactivated, the countdown will continue.

• If all of the buttons are inactive except for Stop/Go, Lock, ON/OFF and

POWER key and no keys are touched within 10 minutes, all of the active cooking

zones are automatically switched off.

TO TURN OFF

Touch Stop/Go key again within 10 minutes. The indicator light above Stop/Go

button will turn off and the cooktop continues with the settings that were set before the

Stop / Go.