User Manual

26
Timer
OPERATION
TIMER
• A short key press adjusts the time by 1 minute and a long key press by 10
minutes. The automatic timer range from 1 minute - 99 minutes. This is used to
automatically turn off the cooktop.
• NOTE: Seconds are not used in the timer settings.
• The red dot next to the time symbol indicator will illuminate indicating that the
cooking elements is selected.
TO SET TIMER
• While cooking, touch the timer key pad until the time light of the desired cooking
element is on. Time digital displays read “00” and blinking.
• Use “+” or “-” key to adjust and set the desired time.
• The timer will begin 5 seconds after setting the timer.
• The display will stop blinking and will stay static on the display.
• The cooking element that the timer was set on will automatically shut off once
time runs out.
• If you want to set another burner to a timer, touch timer key to the desired time
symbol indicator blinks, repeat the same steps above.
• If you want to check the remaining time for another cooking element, touch the
timer until the time symbol indicator for the desired cooking element blinks.
• If more than one switch-off time is programmed, the shortest time remaining will
show in the digital display.
TO CANCEL TIMER
• Touch the Timer until the time symbol indicator for the desired cooking element
blinks, then touch the “+” or “- ” to set the timer to 00.
• The Time digital display will blink for 5 seconds and then turn off, indicating that
the timer of selected cooking element has been cancelled.