R angetops Installation Guide and Users Manual
Registering Your Product Please register your ZLINE appliance to activate your warranty. Begin the simple registration process by scanning the QR code. By registering your appliance, you will have access to: • Technical Support • Warranty Service • Tracking your support inquiries ZLINE is fueled by a passion for innovation; A relentless pursuit of bringing the highest end luxury designs and professional features into everyone's homes.
Enjoy the versatility and high performance cooking power of ZLINE’s rangetops. No matter your kitchen needs, this collection offers four to seven burners in various finishes, sizes, and BTUs. Enjoy precise heat control through imported Italian burners combined with durable cast iron grills, both known for their even heat distribution and longevity. Made by hand and innovatively designed - allowing exploration for the love of food.
WARRANTY COVERAGE ZLINE Kitchen and Bath range products will be warrantied for one year from the original purchase date for the original purchaser of the product. This warranty covers all parts and labor for necessary repairs if any part of the product proves to be defective in materials or workmanship. The product must be deemed serviceable via troubleshooting with the ZLINE Kitchen and Bath service team.
WARRANTY WHAT IS NOT COVERED 1. Installation or start-up, damages or problems caused by improper installation or use. 2. Improper liquid propane conversion or damage related to improper liquid propane conversion. 3. Cook top burner flame adjustments or related complaints. 4. Service by an unauthorized service providers or damage related to unauthorized service or unauthorized parts. 5. Installation in any commercial or non-residential application. 6.
TABLE OF CONTENTS IMPORTANT SAFETY INSTRUCTIONS 1 WARRANTY AND SERVICE 3 PRODUCT DIMENSIONS 4 BEFORE INSTALLATION 5 POWER RATING & ELECTRICAL CONNECTION 6 WIRING SCHEMATICS 6 GAS CONNECTION 8 GAS CONVERSION PROCEDURE 14 FINAL CHECKLIST 17 COOKTOP COOKING 18 MAINTENANCE AND CLEANING 21 TROUBLESHOOTING 22
SAFETY INSTRUCTIONS An air curtain or other overhead range/cooktop hood which operates by WARNING blowing downward airflow onto the range, shall not be used/installed in conjunction with this gas range. • The manufacturer will not be responsible for any damage to property or to persons caused by incorrect installation, improper use of the appliance, or failure to heed the warnings listed.
SAFETY INSTRUCTIONS • A manual gas shut-off valve must be installed in the gas supply line ahead of the oven in the gas flow for safety and ease of service. • Please read and follow these important instructions for the safety of your home and the people living in it. • Please ensure that the altitude of your home is conducive for the use of gas cooking products. If the product is installed at higher altitudes above sea level, you may experience issues with gas pressure that will affect product performance.
SERVICE WARRANTY AND SERVICE The rating tag shows the model and serial number of your range. The tag is located near the power cord. All range products carry a one year parts warranty and includes service, if required. If you experience any issues with your product, contact us directly at 1-614-777-5004. The ZLINE customer service team is ready to work with you on resolving your issues and assessing if further service is needed.
BEFORE INSTALLATION SIZES 27 27"7/16(695) ” 23"15/16(608) 23 ” 22"3/4 ” (70) 7/ 16 30“ 15/ 16 3/ 4 8“ 27.5“ 36“ 1"3/8 (35) 18“3/8” 27.5“ 11"5/16 ” 5/ 16 7 ” 7/ 8 5"3/8 (137 53/8” 48“ 1"15/15 (48.5) 2” 8“ 27.5“ CUT OUTS 27 27"7/16(695) ” 23"15/16(608) 23 ” 22"3/4 ” (70) 7/ 16 15/ 16 /8 ” 47"7/847 (1215) 7 3/ 4 1"3/8 (35) 13/8” 5"3/8 (137 53/8” 11"5/16 ” (33.5) 5/ 16 7 ” 7/ 8 1"15/15 (48.5) 2” 1"3/8 (35) 13/8” 1/ 4 1"1/41(32) ” Product Dimensions 3"(76.
BEFORE INSTALLATION INSTALLING THE RANGE TOP Place the range top in the appropriate-sized cabinet base. Review cutout sizes on page 4. The range top can sit in the cabinet with or without glue. GAS An agency-approved, properly-sized manual shut-off valve should be installed no higher than 3” above the floor and no less than 2” and no more than 8” from the right side (facing product). To connect gas between shut-off valve and regulator, use agency-approved, properly sized flexible or rigid pipe.
INSTALLATION A properly grounded and horizontally-mounted electrical receptacle type NEMA 1450R should be installed no higher than 3” above the floor, no less than 2” and not more than 8” from the left side (facing product); refer to electrical connection section. The appliance shall be connected to a single phase electric line rated at 120Vac and 60Hz frequency. The true voltage in most homes is usually between these values.
INSTALLATION T6NN600NCN Model: RT/RTB/RTS-36 GREEN RED WHITE 110~120V - 60Hz WIRE CONNECTOR IGNITION ALLUMAGE GROUND WIRE RED MICROSWITCH 4 3 MICROSWITCH 1 MICROSWITCH 5 2 MICROSWITCH 6 MICROSWITCH MICROSWITCH Model: RT/RTB/RTS-48 T7NN700NCN GREEN RED WHITE 110~120V - 60Hz WIRE CONNECTOR RED MICROSWITCH MICROSWITCH MICROSWITCH MICROSWITCH MICROSWITCH 7 5 6 5 4 3 2 MICROSWITCH 1 MICROSWITCH Wiring Diagrams IGNITION ALLUMAGE GROUND WIRE 7
INSTALLATION • This appliance shall only be installed by an authorized professional. • The appliance shall be installed in accordance with the standards of the country where it will be installed. The installation of this appliance must conform to local codes and ordinances. In the absence of local codes installation must conform to American National Standards, National fuel Gas code ANSI Z223.1-Latest edition/NFPA 54 or B 149.1.
INSTALLATION ROOM VENTILATION An exhaust fan may be used with the appliance; in each case it shall be installed in conformity with the appropriate national and local standards. Exhaust hood operation may affect other vented appliances; in each case it shall be installed in conformity with the appropriate national and local standards. The use of a gas cooking appliance generates heat and humidity in the room where it is installed. Proper ventilation in the room is needed.
INSTALLATION • All gas connections must comply with national and local codes. The gas supply line (service) must be the same size or greater than the inlet line of the appliance. This range uses a ½˝ NPT inlet. Use appropriate sealant on all pipe joints that are resistant to gas. • This range can be used with Natural or LP/propane gas. The range is shipped from the factory for use with natural gas.
INSTALLATION MANUAL SHUT-OFF VALVE This valve is not shipped with the appliance and must be provided by the installer. The manual shut-off valve must be installed in the gas service line between the gas hook-up on the wall and the appliance inlet, in position where it can be reached quickly in the event of an emergency. In Massachusetts: A T handle type manual gas shut-off valve must be installed in the gas supply line to this appliance.
INSTALLATION PRESSURE REGULATOR Since service pressure may fluctuate with local demand, every gas cooking appliance must be equipped with a pressure regulator on the incoming service line for safe and efficient operation. Pressure Regulator • The pressure regulator shipped with the appliance has two female threads 34”NPT. The regulator shall be installed properly in order to be accessible when the appliance is installed in its final position.
INSTALLATION The gas conversion procedure for this range includes: 1. Pressure Regulator 2. Surface Burners 3. Flame Adjustment The conversion is not finished if all steps are not completed. Before performing the gas conversion, locate the package containing the replacement nozzles, which has a number indicating its flow diameter printed on the body. Consult the table below for matching nozzles to burners. Save the nozzles removed from the range for future use.
INSTALLATION STEP 1: PRESSURE REGULATOR The pressure regulator supplied with the appliance is a convertible type pressure regulator for use with Natural Gas at a nominal outlet pressure of 4˝ w.c. or LP gas at a nominal outlet pressure of 11” w.c. and it is pre-assembled from the factory to operate with one of these gas pressure as indicated in the labels affixed on the appliance, package and instruction booklet. To convert the regulator for use with other liquid propane LP gas: 1.
INSTALLATION STEP 2: SURFACE BURNERS To replace the nozzles of the surface burners, lift up the burners and unscrew the nozzles shipped with the range using a 7 mm (socket wrench). Replace nozzles using the conversion set supplied with the range. Each nozzle has a number indicating its flow diameter printed on the body. Consult the table on page 13 for matching nozzles to burners.
INSTALLATION STEP 3: 1. Light one burner at a time and set it to the MINIMUM position (small flame). 2. Remove the knob. 3. The range is equipped with a safety valve. Using a small-size flathead screwdriver, locate the choke screw (see diagram below) and turn to the right or left until the burner flame is adjusted to desired minimum. 4. Make sure that the flame does not go out when switching quickly from the MAXIMUM to the MINIMUM position. The high flame setting cannot be adjusted to be lower.
INSTALLATION 1. Is the back guard securely connected? 2. Is the electricity properly grounded? 3. Is the gas service line connected following the directions of the manufacturer? 4. Have all the proper valves, stoppers, and gaskets been installed between the range and the service line? 5. Has the gas connection been checked for leaks? 6. Has the range been setup for the type of gas available in the household? (propane or natural gas) 7.
OPERATION COOKTOP COOKING • This product is intended for the cooking of food and must not be used for other purposes. • Unstable or deformed pans should not be placed on the burners or hot plates in order to avoid accidents caused by spill over. • Particular care should be taken when cooking with oil or fat. • Always ensure that the knobs are in the “O” Off or Stop position when the appliance is not in use. • Before maintenance and cleaning, disconnect the appliance and allow cooling down.
OPERATION SURFACE BURNER OPERATION - ELECTRIC IGNITION To activate the electric ignition, simply push the knob in to activate the spark. While still pushing the knob in, turn the control knob counter-clockwise to release the gas. The spark will be released at the metal tip of the white ceramic pin located on the side of the burner. Once the flame is on, release the control knob gently. If the flame turns off, simply repeat the above procedure.
OPERATION Be sure to set all worktop/oven/broiler burner controls to the OFF position after each use of the appliance. OFF Maximum Flame Height Minimum Flame Height Maximum temperature setting/recommended control knob position for burner OFF ignition. OFF The regulating knobs should be turned in anti-clockwise direction until the small flame symbol, vice- versa for the larger flame symbol.
MAINTENANCE AND CLEANING CLEANING YOUR RANGE During cleaning operation never move the appliance from its original WARNING installation position. Never use abrasive cleaners! Scratches on the stainless steel surfaces are permanent. Do NOT clean the range when hot! All stainless steel body parts should be wiped with hot, soapy water and with a stainless steel cleanser. If build-up occurs, do not use steel wool, abrasive cloths, cleaners, or powders.
TROUBLESHOOTING PROBLEM POSSIBLE CAUSE Rangetop is not connected to electrical power. Check power circuit breaker, wiring, and fuses. If Igniters are not sparking all electrical components are properly installed, call customer support. Gas supply valve is in the “OFF” position or gas Burner does not ignite supply is interrupted. Burner ports are clogged or the unit is not set to the Igniter sparking taut; no appropriate gas type. Call customer service at flame ignition 1-614-777-5004.
Three Locations: 350 Parr Circle Reno, NV 89512 916 Delaware Avenue Marysville, OH 43040 427 Rowland Mill Road Bruceton, TN 38317 www.zlinekitchen.com 1-614-777-5004 1.1.