Installation Guide

15
Sink Installation
Undermount Installation Continued
5. Insert the Sink
Insert the sink on the support frame. Apply silicone-based sealant to each corner
between the frame and the sink.
6. Seal with Silicone-based Sealant
Apply silicone-based sealant on the border of the sink and install the countertop.
Remove excess sealant.
7. Pipe Installation
Install the faucet following the manufacturer’s instructions. Make proper water and
waste pipe connections.
Sink Drain Schematics
Excess sealant must be removed prompltly with a suitable clean-up
solvent recommended for use on both the counter and sink to ensure
damage does not occur.