Sink
CONTENTS SAFETY INSTRUCTIONS 1 SINK DIMENSIONS 2 Undermount Bar Sink Top Mount Bar Sink Round Sink Single Bowl Round Sink Double Bowl Ledge Sink Single Bowl Stamp Ledge Sink Single Bowl Apron Sink Single Bowl Apron Sink Double Bowl Arc Sink Single Bowl Arc Sink Double Bowl SINK INSTALLATION 12 Before Installation Top Mount Installation Undermount Installation Sink Drain Schematics CARE AND CLEANING 16 Easy Cleaning Scratches Knives Water Quality Foods DOS AND DON’TS 17 INCLUDED ACC
Safety Instructions The installer and/or user must read, understand and follow these instructions before installing the product. This product must be properly installed before it is used. If instructions are not followed, the manufacturer will not be held responsible for any problems or product malfunction. Failure to follow installation and/or operating instructions voids the warranty. We recommend that this product be installed by a certified plumber.
Sink Dimensions SUS- 15 Undermount Bar Sink " SUS-15 " " " " " Top Mount Bar Sink STS-15 One st r ai ner No gr i d 2
Sink Dimensions Round Sink Single Bowl SRS-23 SRS- 27 " " " " " " SRS-27 3 One st r ai ner One gr i d
Sink Dimensions Round Sink Single Bowl SRS- 30 SRS-30 " " " " " SRS- 33 SRS-33 " " " " " " One st r ai ner One gr i d 4 One st r ai ner One gr i d
Sink Dimensions SRS-Bowl 36 Roundsink Single " " " " " " SRS-36 SR60D Roundsink Double Bowl- 33 One st r ai ner One gr i d " " " " SR60D-33 " " " 5 Two st r ai ner Two gr i d "
Sink Dimensions SR50D- 33 Round Sink Double Bowl SR50D-33 " " " " " " " " SR60D- 36 SR60D-36 " Two st r ai ner Two gr i d" " " " " " " 6 Two st r ai ner Two gr i d
Sink Dimensions SR50D- 36 Roundsink Double Bowl " SR50D-36 " " " " " " " SLS- 33 Ledge Sink Single Bowl SLS-33 Two st r ai ner Two gr i d " " " " " " " 7 One st r ai ner One gr i d
Sink Dimensions Apron Sink Single Bowl SAS- 30 SAS-30 " " " " " " " " One st r ai ner One gr i d 8
Sink Dimensions Apron Sink Single SASBowl33 SAS-33 " " " " " " " " Apron Sink Double Bowl SA60D- 36 One st r ai ner One gr i d SA60D-36 " " " " " " " " " 9 Two st r ai ner Two gr i d
Sink Dimensions SA50D- 36 Apron Sink Double Bowl SA50D-36 " " " " " " " " " SCS- 22 Arc Sink Single Bowl Two st r ai ner Two gr i d " " " SCS-22 " " " 10 One st r ai ner One gr i d
Sink Dimensions Arc Sink DoubleSC Bowl 30D- 33 " " " " " SC30D-33 " " " " " Arc Sink Double SC70D-Bowl 33 Two st r ai ner Two gr i d " " " " SC70D-33 " " " " " " " 11 Two st r ai ner Two gr i d
Sink Installation Before Installation Inspect the sink for any visible defects. Do not install the sink if defects are found. Call customer service for assistance. Remove the drain by unscrewing the screw from the drain until it is completely separated from the sink. Top Mount Installation 1. Trace the opening. Locate the “top mount” template in the box. Carefully cut along the dotted lines. Keep the inside portion of the template.
Sink Installation Top Mount Installation Continued 3. Drain Installation Insert the metal strainer into the rubber seal, and then into the draining hole. Install the rubber gasket and the main drain body underneath the sink. Using the screw, tighten the main drain body and the metal strainer into place. Install the basket on top of the metal strainer. Repeat the same procedure for the installation of the second draining hole (twin and double bowls only).
Sink Installation Undermount Installation 1. Trace the Opening Locate the undermount installation template in the box. Cut carefully along the dotted lines. Keep the inside portion of the template. It contains important information concerning the care and maintenance for your sink. Place the template on the counter where you would like your sink to be. When installing the template, make sure that the tank will not interfere with cabinet doors or panels.
Sink Installation Undermount Installation Continued 5. Insert the Sink Insert the sink on the support frame. Apply silicone-based sealant to each corner between the frame and the sink. 6. Seal with Silicone-based Sealant Apply silicone-based sealant on the border of the sink and install the countertop. Remove excess sealant. 7. Pipe Installation Install the faucet following the manufacturer’s instructions. Make proper water and waste pipe connections.
Care and Cleaning Easy Cleaning Instructions Rinsing is the most important part of sink care. A stainless steel sink finish will retain its original bright appearance if the sink is rinsed thoroughly after each use. Running the water from the spray hose for a few minutes will be thorough. Typically, a rinse and towerl drying after each use take care of most everyday clean ups. Ideally, once a week the sink should be scoured with a mildly abrasive cleaner, such as Comet.
Dos and Don’ts Do rinse thoroughly after each use. Do towerl dry after each use to prevent mineral deposits from building up on the surface of the sink. Do clean the sink once a week, being sure to rub in the direction of the satin finish grain lines. Do use a bottom grid or rinsing basket to “protect” the finish. Bottom grids and rinsing baskets can remain in the sink and will not cause rusting or pitting. Do Not rub the sink across the satin finish lines.
Included Accessories Bottom Grid (not included with certain models) Basket Strainer Microfiber Cloth Certain models will include a cutting board* 18
Kitchen and Bath Two Locations: 916 Delaware Avenue Marysville, Ohio 43040 350 Parr Circle Reno, NV 89512 www.zlinekitchen.
