K itchen F aucets Installation Guide and Users Manual
ZLINE created a wide range of faucet solutions delivering comfortable elegance and undeniable quality down to the smallest detail. Brass housing allows ZLINE faucets to be durable and provides sophistication. It’s what’s on the inside that counts. Behind the scenes, ZLINE’s main focus is improving water efficiency. The faucets are manufactured with carefully hand selected materials that undergo over 50,000 unit tests, well over the industry standard for certification of 15,000 tests. 1.
TABLE OF CONTENTS SAFETY INSTRUCTIONS 1 Prior to Installation Safety Tips Installation Preparation Care and Maintenance Notes SPRING FAUCETS 3 Parts Tools Models: FSNZ (Apollo Series) FSTB (Sierra Series) 12-0140 (Van Gogh Series) Assembly PULL DOWN FAUCETS 9 Parts Tools Models: FPBC (Castor Series) 11-0129 (Shakespeare Series) FPBL (Edison Series) FPTF (Gemini Series) 11-0130 (Dante Series) 11-0128 (Voltaire Series) FPTB (Arthur Series) 13-0048 (Renoir Series) FPNZ (Monet Series) 11-0131
TABLE OF CONTENTS FMTF (DA VINCI) PULL DOWN FAUCET 19 Parts Tools Model: FMTF (Da Vinci Series) Assembly SINGLE HANDLE FAUCET 24 Parts Tools Models: FFCS (Rembrandt Series) Assembly DOUBLE HANDLE FAUCET 30 Parts Tools Models: FFCC (Mona Series) Assembly TROUBLESHOOTING 36
Safety Instructions Prior to Installation Make sure that the cold and hot water lines are turned off. Wrap all threaded connections with plumber’s tape. Always wrap in a clockwise direction. Cover your drain to avoid losing parts. Do not disassemble the main faucet body, as it has been installed and commissioned correctly and precisely before delivery to the factory. To keep the faucet from jamming, flush the water pipe before installation. Operating conditions: Working pressure at 0.05-1.
NOTES Faucet Model: Purchase Order #: Date: 2
Spring Faucet 3
Spring Faucet Tools: Time required: Wrench Phillips-head screwdriver +/- 45 minutes Bucket Legend: Hot Water Warning Cold Water Grease Plumber’s Tape- Used for a watertight seal on threaded pipe joints.
Spring Faucet Spring Kitchen Faucet Models FSNZ (Apollo Series) FSTB (Sierra Series) 5
Spring Faucets Spring Kitchen Faucet Models 12-0140 (Van Gogh Series) 6
Spring Faucet Loosen the fixing nut and screws and put aside. Mount faucet to counter top. Plumbers Tape Secure the hardware into place with the Base O-ring, nuts, and screws. 7 Secure the hoses to the hot (red) and cold (blue) lines appropriately.
Spring Faucet spray head spray head Test the faucet. Make sure that the spray head is properly secured. Review the diagram to understand the hot, cold, and open settings.
Pull Down Faucets 9
Pull Down Faucets Tools: Time required: Wrench Phillips-head screwdriver +/- 45 minutes Bucket Legend: Hot Water Warning Cold Water Grease Plumber’s Tape- Used for a watertight seal on threaded pipe joints.
Pull Down Faucets Pull Down Kitchen Faucet Models FPBC (Castor Series) 11-0129 (Shakespeare Series) 11
Pull Down Faucets Pull Down Kitchen Faucet Models FPBL (Edison Series) FPTF (Gemini Series) 12
Pull Down Faucets Pull Down Kitchen Faucet Models 11-0130 (Dante Series) 11-0128 (Voltaire Series) 13
Pull Down Faucets Pull Down Kitchen Faucet Models FPTB (Arthur Series) 13-0048 (Renoir Series) 14
Pull Down Faucets Pull Down Kitchen Faucet Models FPNZ (Monet Series) 11-0131 (Dali Series) 15
Pull Down Faucets Loosen the fixing nut and screws and put aside. Mount faucet to counter top. Plumbers Tape Secure the hardware into place with the Base O-ring, nuts, and screws. Secure the hoses to the hot and cold lines appropriately.
Pull Down Faucets Drain the valve. Secure the hardware Drain Tighten the the valve. hardware.into place. spray head spray head Test the faucet. 17 Make sure that the spray head is properly secured.
Pull Down Faucets Apply the weight to the center of the hose for even distribution. Review the diagram to understand the hot, cold, and open settings.
Pull Down Faucet (FMTF) 1 6 1. Faucet Body 2. Base O-Ring 2 3. Rubber Washer 4. Metal Washer 5. Fixing Nut and Screws 6.
Pull Down Faucet (FMTF) Tools: Time required: Wrench Phillips-head screwdriver +/- 45 minutes Bucket Legend: Hot Water Warning Cold Water Grease Plumber’s Tape- Used for a watertight seal on threaded pipe joints.
Pull Down Faucet (FMTF) Pull Down Kitchen Faucet Model FMTF (Da Vinci Series) 21
Pull Down Faucet (FMTF) Hot Cold Turn off the water valves and place a bucket beneath, in case of dripping. Mount the faucet to the counter top. Cold (Blue) Hot (Red) 9/16-24 UNEF Hot Secure the hardware into place with the Base O-ring, nuts, and screws. Cold Attach the hot and cold lines to the valves appropriately.
Pull Down Faucet (FMTF) spray head spray head Test the faucet before installing the spray head. Make sure that the spray head is properly secured. Test the faucet. Press the button to switch from stream to spray.
SINGLE HANDLE FAUCETS 24
SINGLE HANDLE FAUCETS Tools: Time required: Wrench Phillips-head screwdriver +/- 45 minutes Bucket Legend: Hot Water Warning 25 Cold Water Plumber’s Tape- Used for a watertight seal on threaded pipe joints.
SINGLE HANDLE FAUCETS Kitchen Faucet with Sprayer Models: FFCS (Rembrandt Series) 26
SINGLE HANDLE FAUCETS Loosen the fixing nut and screws and put aside. Mount faucet to counter top. Plumbers Tape Secure the hardware into place with the Base O-ring, nuts, and screws. 27 Secure the hoses to the hot and cold lines appropriately.
SINGLE HANDLE FAUCETS Test the faucet. Loosen the washer on the spray head. Mount spray head to counter top. Secure the hardware into place with nuts and screws.
SINGLE HANDLE FAUCETS Tighten the hardware. 29 Review the diagram to understand the hot, cold, and open settings.
DOUBLE HANDLE FAUCETS 30
DOUBLE HANDLE FAUCETS Tools: Time required: Wrench Phillips-head screwdriver +/- 45 minutes Bucket Legend: Hot Water Warning 31 Cold Water Plumber’s Tape- Used for a watertight seal on threaded pipe joints.
DOUBLE HANDLE FAUCETS Kitchen Faucet with Sprayer Models: FFCC (Mona Series) 32
DOUBLE HANDLE FAUCETS Loosen the fixing nut and washers and put aside. Mount faucet to counter top. Secure the hardware into place with the Base O-ring, nuts, and screws. Secure the hoses to the hot and cold lines appropriately.
DOUBLE HANDLE FAUCETS Loosen the washer on the spray head. Mount spray head to counter top. Secure the hardware into place with nuts and screws. Use the hose to connect the spray head and main faucet head.
DOUBLE HANDLE FAUCETS Review the diagram to understand the hot, cold, and open settings.
Troubleshooting Problem Possible Cause Solution There is leakage under the The locking nut has Unscrew the lever on the handle. come loose. handle by hand. Loosen set screw with a hex wrench. Remove the handle and unscrew trim cap by hand. Tighten locking nut with an adjustable wrench. Water will not shut off Cartridge may be Unscrew the level on the completely. defective. handle by hand. Loosen set screw with a hex wrench. Remove the handle and unscrew trim cap by hand.
Kitchen and Bath Three Locations: 350 Parr Circle Reno, NV 89512 916 Delaware Avenue Marysville, OH 43040 319 Rowland Mill Road Bruceton, TN 38317 www.zlinekitchen.
