User's Manual

11
®
connect to a wireless network.
After saving all parameters, click the [Submit] button, the setting will take effect immediately.
Now pull out network cable, you can access the IP network camera via Wi.
Note: WIFI setting only works to those types with WIFI function.
Wired network and wi- network should not be set in the same network segment.
WIFI mode supported by IP Camera: 802.11b/g protocol(small power WiFi type)
802.11b/g/n protocol (large power WiFi type)
*Listener Port (LPRT)
[Web Listening Port]
The default port 80(port 80 is recommended)
[Video Listening Port]
default 8000 (8000 is recommended).
[Mobile phone Listening
Port] default 9000 (9000 is recommended).
After setting all parameters, click the [Submit] button, the setting will take effect immediately.
Figure 4-8 LPRT setting
Note: LPRT can be selectable during range of 1024~65535, can't be repeated. Web LPRT can be 80.
*PPPOE
[PPPOE]
Set to enable or disable the PPPOE dial-up function.
[User name]
The ADSL dial-up account, obtain from internet service provider.
[Password]
Password of ADSL dial-up account, obtain from internet service provider.
After setting all parameters, click the [Submit] button, the setting will take effect immediately.