User's Manual

20
®
5. Appendix
▇▅▃
Appendix 1 Specication
Type of Parameter
720P Network Camera
VGA Network Camera
Camera
Sensor 1/3" CMOS sensor 1/4" CMOS sensor
Pixel 1280(H)*720(V) 640(H)× 480(V)
Picture procession
Brightness
Brightness, contrast, saturation
Power 12 V DC @ 600 mA 12 V DC @ 300 mA
Network interface RJ45 10/100M, with Indicator light. RJ45 10/100M, with Indicator light.
Indicator light Power indicator light /Status Indicator light Power indicator light /Status Indicator light
Antenna Wi wireless modem/ Wi Antenna Wi Antenna
Reset button
Hold pressing the RESET button 5
seconds, the system will clear user’s data
automatically and restore factory setting
Hold pressing the RESET button 5 seconds,
the system will clear user’s data automatically
and restore factory setting
Physical
parameters
Temperature -10- 50°C -10- 50°C
Humidity 20%-80% Noncondensing 20%-80% Noncondensing
Video Video compression H.264/JPEG H.264/JPEG
Parameters
Video code
1280 x720/640x480/320x240
640x480/320x240
Sub video code
640x480/ 320x240
320x240
Video Compression
Resolution
CBR, VBR CBR, VBR
Frame rate
1~30fps Selectable for main stream and
sub stream
1~30fps Selectable for main stream and sub
stream
Appendix 2 System Default Parameter
User name: admin password: 111111
Wired cable network
IP address: 192.168.0.100 Subnet mask:255.255.255.0
Gateway: 192.168.0.1 DHCP: Close
Wireless network
IP address: 192.168.0.101 Subnet mask 255.255.255.0
Gateway: 192.168.0.1 DHCP: Close
Port
Web LPRT:80 Web mapping port:3000
Video LPRT:8000 Video mapping port:3001
Mobile phoneLPRT:9000 Mobile phone mapping poprt:3003