User manual

21
First, verify that your wireless router is broadcasting a wireless signal. Then,
click the scan button. After you click it two or three times, the camera will find
all Wireless LAN networks automatically. You will then select the Wireless LAN
you want, input the wireless password, and click “Submit”.
6.1.8 ADSL Settings
Configure a dial-up connection. If this setting is needed, your ISP will be able
to give you the necessary information.
6.1.9 UPnP Settings
“UPNP” or “Universal Plug and Play” is designed to open ports automatically
when you need them to avoid needing to forward ports directly through the
router. If you have difficulty accessing your camera remotely using UPnP, then
you will want to disable UPnP, and forward the ports directly.
6.1.10 DDNS Service Settings
Configure the camera to automatically update your third party DDNS service.