User`s guide

HOW TO INSTALL
6
1201-1205 ,Sangda Mansion, High Technology Park,
ShenZhen, Guangdong, China
Fax: Tel: [phone] 0755-3363-1639
Attach the Mount Bracket to the
mounting location using the 3
screws supplied in your package. As
shown in the picture, push the three
screws into the 3 holes on the bottom
of the Mount Bracket, then twist in the
screws into the wall using a screwdriver.
2
step
3
step
Attach the Main Body to the Mount
Bracket by rotating the Main Body
on clockwise until it becomes tight.
4
step
Pinhole Lens
Last, adjust the slope of the lens
by using the screw on the Mount
Bracket. Make sure that the pinhole lens
is facing the camera’s monitoring area.
The camera now is installed on the
mounting location.
Screw
As shown on the left, you can also put the
whole Main Body into the wall or ceiling.
Only left the pinhole lens outside. If
mounted in this way, it will be more covert.
Note