User's Manual

Appendix A: Android Setup
Figure 1 Figure 2
Figure 3 Figure 4
Connecting to a Device Playing Video
1.From the main interface, tap the settings gear
in the bottom left corner to enter the device list.
(Fig1)
2.If there are no devices added, you will be
prompted with “No device, please add.” Tap
Add new device. (Fig2)
3.Enter a name for the DVR. Then enter the
corresponding IP address, mobile port number,
case sensitive username and password, and
the number of channels your DVR has. Select
OK to save your device. (Fig3/Fig4)
4.To delete or edit a device, press and hold on its
name from the device list. (Fig2)
29
1. From the main page, tap any blank
window and you will see an orange
highlight around the perimeter of the
window. (Fig1)
2. Press the settings gear and select a
device from the device list. Upon selecting
a device its channel list will appear, then
select a channel that will then be played in
the previously highlighted box.
3. Repeat step 1 and 2 up to four times.
Each box may be connected to either the
same or separate devices from the list and
can be controlled independently.