User's Manual

16-channel H.264 DVR User Manual
7
2.4 Shortcut Menu
Click the right button on the DVR interface or right-click on the mouse after system
startup to open the Quick Operations popup menu. This menu has the following setting
options: MAIN MENU, KEYLOCK, CHANNEL SWITCH, VIDEO SEARCH, START
SEQUENCE, START CRUISE, PTZ CONTROL, MUTE, MANUAL RECORD, STOP
RECORD and PIP MODE.
2.4.1 Main Menu
Click MAIN MENU to enter the main menu interface. See 3.1 for more information about
the main menu.
2.4.2 Key Lock
When the password function is enabled (please see 2.3), click the right button in
l i ve p rev ie w and select KEYLOCK in the pop-up menu. The system interface
will be locked immediately, and the password is required to log in to access the
menus.
2.4.3 Channel Switch
Allows the user to select a specific channel.
2.4.4 Video Search
Please see Chapter 3.
2.4.5 Start Sequence
Start video channel automatic sequence function. Right-click to exit this feature.
2.4.6 Start Cruise
Begin the PTZ cruise set by the user. This will be replaced with Stop
Cruise when this function is enabled.
Note: This feature can only be used after the user sets up PTZ control
parameters and preset points.
2.4.7 PTZ Control
Click right button in main interface and select PTZ Control. The following interface
will appear: