User Guide

14
9
Status light definitions
Solid green
Your Pivot is powering on.
Solid blue
Your Pivot has successfully connected to the WiFi
network.
Blinking green
Your Pivot is ready for setup.
Blinking blue
Your Pivot is connecting to the WiFi network. Please
do NOT turn off or unplug your Pivot at this time.
Please make sure that you entered the network name and
password correctly. Note: Both are case-sensitive.
You may need to improve your WiFi strength. Visit
www.zmodo.com/support for suggestions.
Try resetting your Pivot by pressing and holding the Touch
Pad on the top for 10 seconds until the Status Ring turns off.
Retry the setup process when the Status Ring is blinking
green.
If you were unable to connect your Pivot successfully:
Make sure that you are connecting to a 2.4GHz
WPA/WPA2 WiFi network, and that your network is not
hidden.