Manual

4301 Automatic camera switcher module

for trailer camera applications

Specifications:

1. Automatic activation and fits all vehicles

2. Both video and audio signal auto switching at the same time.

3. Built-in CVBS signal booster/driver.

4. Output video load standard 75 ohm

5. Power consumption max.: 0.7W /DC12V

6. Water & Dust resistant: IP67.

The Zorg Automatic Camera Switcher will change from the primary

camera to the secondary camera automatically when the secondary

camera is attached. No external power or switch is required.

NOTE: When the Trailer Camera connection is not used, always use the

supplied weather cap. Water intrusion and corrosion in this connector

from lack of use of the cover is NOT covered under warranty.

Always use dielectric grease on all camera connection points.

PAGE 1
4301 Automatic camera switcher module for trailer camera applications Specifications: 1. Automatic activation and fits all vehicles 2. Both video and audio signal auto switching at the same time. 3. Built-in CVBS signal booster/driver. 4. Output video load standard 75 ohm 5. Power consumption max.: 0.7W /DC12V 6. Water & Dust resistant: IP67. The Zorg Automatic Camera Switcher will change from the primary camera to the secondary camera automatically when the secondary camera is attached.
PAGE 2
Warranty The Company (Zorg North America) warrants that if this product or any part thereof, under regular use, be proven defective in material or workmanship within 36 months from the date of original purchase, such defect(s) will be repaired or replaced with a new or reconditioned product (at the Company's option) without charge for parts and repair labor. The Company will not be responsible for more than the original product cost. Shipping is not covered.