Installation Manual

ManualsBrandsZNA ManualsAutomotiveFront/Rear Digital Obstacle Sensors

Table Of Contents

8001

Digital Learning Park Sensor System

For Front or Rear Applications

Installation Manual

Warranty Continued

Limitations

THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS

WARRANTY IS LIMITED TO THE REPAIR OR

REPLACEMENT PROVIDED ABOVE AND IN NO EVENT

SHALL THE COMPANY'S LIABILITY EXCEED THE

PURCHASE PRICE PAID BY PURCHASER FOR THE

PRODUCT. This warranty is in place of all other express

warranties or liabilities. ANY IMPLIED WARRANTIES

INCLUDING ANY IMPLIED WARRANTY OF

MERCHANTABILITY SHALL BE LIMITED TO THE

DURATION OF THIS WRITTEN WARRANTY. ANY ACTION

FOR BREACH OF ANY WARRANTY HEREUNDER INCLUDING

ANY IMPLIED WARRANTY OF MERCHANTABILITY, MUST BE

BROUGHT WITHIN 36 MONTHS FROM DATE OF ORIGINAL

PURCHASE. IN NO CASE SHALL THE COMPANY BE LIABLE

FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES FOR

BREACH OF THIS OR ANY OTHER WARRANTY EXPRESS OR

IMPLIED, WHATSOEVER.

No person or representative is authorized to assume for the Company

any liability other than expressed herein in connection with the sale

of this product.

Some states do not allow limitations on how long an implied

warranty lasts or the exclusion or limitation of incidental or

consequential damage, so the above limitations or exclusions may

not apply to you. This warranty gives you specific legal rights, and

you may also have other rights which vary from state to state.

The information in this manual was accurate at the time of printing.

Changes in features, function, appearance, or other attributes may

occur at any time. Zorg North America is not responsible for errors

or omissions in this manual and makes every attempt to stay current.

WWW.ZORG-NA.COM

MADE IN CHINA

Summary of content (9 pages)

PAGE 1
Warranty Continued Limitations THE EXTENT OF THE COMPANY'S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR REPLACEMENT PROVIDED ABOVE AND IN NO EVENT SHALL THE COMPANY'S LIABILITY EXCEED THE PURCHASE PRICE PAID BY PURCHASER FOR THE PRODUCT. This warranty is in place of all other express warranties or liabilities. ANY IMPLIED WARRANTIES INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY SHALL BE LIMITED TO THE DURATION OF THIS WRITTEN WARRANTY.
PAGE 2
PAGE 3
Warranty using Zorg part# 8002 2 sensor pack. Includes 0 and 8 degree sensor sleeves to fit most The Company (Zorg North America) warrants that if this product or any part thereof, under regular use, be proven defective in material or workmanship within 36 months from the date of original purchase, such defect(s) will be repaired or replaced with a new or reconditioned product (at the Company's option) without charge for parts and repair labor.
PAGE 4
vehicle. If the system becomes inoperable or is not working correctly it is the drivers reasonability to ensure that the vehicle will not impact any object, vehicle, or person. Zorg North America LLC. is not responsible or liable in any way for lack of safe driving practices. Zorg North America LLC. is not in any way responsible or liable for any improper, incorrect, or installation issues that cause 5. The 8001 is NOT water resistant or waterproof.
PAGE 5
PAGE 6
8001
PAGE 7
The 8001 system comes with a mute/on-off switch. When installed with buzzer until placed in reverse again. The 8001 control module may be programmed to meet the needs of the install. With the power off, adjust the DIP switches to select the required mode. Use the included 26mm Hole Saw if you are using a sensor sleeve.
PAGE 8
.
PAGE 9
a) REVERSE POWER For installation as a rear system locate a trigger wire that will supply 12v + when the vehicle is in reverse gear. The white reverse lamp may be used if the vehicle does not have LED type lamps or if the Vehicle CAN system does not indicate an error or problem by displaying a warning indication. If this happens use a relay to only trigger off the lamp circuit. Connect the Orange and Red wire to the power source.