User's Manual Part 1

Page 16
English
3. Press andholdfor3to5secondsto
delete programming for the selected day.
Press
to exit.
To Cancel All Programs:
1. Press
to make sure you have exited
the Programming Menu.
2. Press and hold
to delete all
programming in the control unit.
The display will turn off for one (1) second.
When all programs are cancelled, the current
day and time is displayed on the screen with
no days of the week lit.
Section 6. Cleaning and
Maintenance
WARNING
To avoid electric shock and other hazards which
could result in permanent injury or death, disconnect
(unplug) the cleaner from the power source before
performing any cleaning and maintenance.
6.1 Cleaning the Filter Canister
Theltercanistershouldbecleanedattheendofeach
cycle.
1. Make sure the control unit cable is disconnected
fromtheelectricaloutletortheoatingcable
has been disconnected from the control unit.
2. Remove the cleaner from the water and let
the remaining water drain by maintaining the
cleaner in the vertical position.
3. Set the unit on its wheels.
4. Toremovetheltercanisterassemblyfromthe
cleaner,followsteps5through8.
5. Pushthecoverlock(1)andliftthecover(2)
until it is secured in the vertical position.
(Figure 24).
2
1
Figure 24. Lift Cleaner Cover
6. Removetheltercanisterassemblyfromthe
body(3),asshowninFigure25.