Instruction manual

SECTION 2 – CORRECT SETTINGS
ADJUSTMENT SUGGESTIONS
AUTO WEIR VALVE
The Baracuda
®
Auto Weir Valve is preset at the factory to obtain
maximum pool cleaning efficiency.Your Baracuda
®
Pacer is preset on
setting 1. However,if you do experience difficulties,it can be manually adjusted
to one of the three settings (high,medium or low).You will only need to adjust
the Auto Weir Valve if the following occurs:
4
The Baracuda
®
pool cleaner is Reduce Auto Weir Valve to
performing too fast and/or climbing medium or low setting.
above the level of the water.
The Baracuda
®
pool cleaner is Increase Auto Weir Valve to
performing slowly and/or is not medium or high setting.
climbing the pool walls.
PROBLEM SOLUTION
2
1
13
2
3
23
You no longer
need to remove
the Baracuda
®
Auto Weir Valve
from the weir.
Simply depress the red pivoted
arm (A),until it locks
open the flow door.
To r ecommence pool cleaner
operation,release the pivoted
arm (A) by pressing down
on the flow door (B).
It’s that simple!
TURNING YOUR BARACUDA®
PACER OFF IS MADE EASY
WITH THE
AUTO
WEIR
VALVE.
1. LOW
SETTING
2. MEDIUM
SETTING
3. HIGH
SETTING
This end
plugs into weir
Hose attaches
to this end
A
B
Water flow