W90070 ABN 87 002 641 965 PO Box 7238 Wetherill Park, NSW 2164 Australia Ph: 1800 688 552 Fax: 1300 781 688 www.zodiac.com.
XXXX Instruction Manual W90070
MASTERING THE ELEMENTS Renowned worldwide for the quality and reliability of its products in the aeronautical and marine sectors, Zodiac has now brought its expertise to swimming pools, to bring you a full range of pools, automatic pool cleaners and water treatment systems. Backed by Baracuda technology, expertise and experience, Zodiac brings you the reassurance of top quality equipment in terms of both design and performance.
OC 16788
WARRANTY INFORMATION ZODIAC G4 TWO-YEAR Warranty This ZODIAC G4 was carefully inspected before shipment from our warehouse. Upon unpacking, if any part is missing or found to be defective, please notify your dealer immediately. Please consult owner's manual for complete instructions on the installation and operation of your ZODIAC G4. ZODIAC GROUP AUSTRALIA WARRANTS THE ZODIAC G4 POOL CLEANER TO BE FREE FROM DEFECTS IN MATERIALS AND WORKMANSHIP FOR A PERIOD OF TWO (2) YEARS FROM DATE OF PURCHASE.
Dear Customer, Thank you for buying a Zodiac G4. It is thanks to you that we have achieved our position as market leader.
Pure, Clear, Natural. • Advanced Water Sanitising and Purification System • Advanced Electrode Technology for Maximum Sanitation • Incorporates Clearwater & Nature2 Technology • Reduces the Time Spent on Maintenance and Manual Cleaning • Self Cleaning Electrode • Easy ‘Set and Forget’ Operation www.zodiac.com.
Notes .............................................................. .............................................................. .............................................................. .............................................................. .............................................................. .............................................................. .............................................................. .............................................................. ..
SECTION 7 – TROUBLESHOOTING Note: If the automatic pool cleaner is climbing the walls excessively, that is an indication that the flow is too high. Review the installation procedures and ensure the AD Flow Valve is set at setting #1. For additional assistance contact our customer service department on 1800 688 552. TROUBLESHOOTING PROBLEM SOLUTION Cleaner stops and starts Check diaphragm for blockage or damage. Use Pool Pulse® to determine proper flow. Check hoses for leaks.
INDEX Page SECTION 1 – INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 SECTION 2 – ZODIAC ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . .7 SECTION 3 – CARE AND MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . .8 SECTION 4 – DIAPHRAGM REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . . . .9 SECTION 5 – DIAPHRAGM ASSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . .10 SECTION 6 – POOL PULSE . . . . . . . . . . . . . . . . . . . . . . . . .
SECTION 1 – INSTALLATION It is much easier to assemble your new ZODIAC G4 automatic pool cleaner beside the skimmer box of your pool.
SECTION 6 – POOL PULSE POOL PULSE®: 5 6 6 5 2 3 4 4 3 2 O 1 The Pool Pulse® is a flow meter that measures the volume of water flowing through your Zodiac cleaner. It must be used to properly set the flow and can be used as a diagnostic tool when the cleaner isn’t running properly. 1 0 IDEAL Showing Setting 2 TOO HIGH Showing Setting 3 TOO LOW Showing Setting 1 HOW TO USE POOL PULSE®: Pool Pulse® can only be used if the filtration system is on.
SECTION 5 – DIAPHRAGM ASSEMBLY DIAPHRAGM ASSEMBLY: Prior to reinstalling the diaphragm, rinse the diaphragm and the inner extension pipe thoroughly to remove any grit or algae. Make sure grey retaining ring is fitted onto diaphragm.
SECTION 1 – INSTALLATION INSTALLATION 1) Firmly push the wheel deflector onto the hose wheel adaptor until it clicks into place. 2) Select a hose length and clip the hose weight onto the end that does not have the Baracuda stamp. This will be your first hose length. 3) Attach the end of the first hose length with the Baracuda stamp, to the pink leader hose adaptor, on the end of the hose wheel adaptor.
SECTION 1 – INSTALLATION Before connecting hose to the fittings in the skimmer box it is essential that all air is removed from the cleaner head and hose. 4) For pools with more than one skimmer box; close off all suction points except for the one the cleaner will be operating from. This provides the cleaner with maximum suction. The hose is now ready to be attached to the fittings in the skimmer box.
SECTION 4 – DIAPHRAGM REMOVAL DIAPHRAGM REMOVAL Step 1: Holding the frame assembly in one hand, unscrew the blue hand nut (approximately four turns anti-clockwise). Step 1 Step 2: Pull the cassette out of the inner head body. Step 2 Step 3: Grasp the cassette in one hand and unscrew the inner extension pipe (approximately four turns anti-clockwise), then remove from the cassette. Step 3 Step 4: Grasp the lip of the diaphragm (yellow end) and pull the diaphragm out.
SECTION 3 – CARE AND MAINTENANCE CARE & MAINTENANCE: Hose: Sunlight (ultraviolet rays), water and pool chemicals create a harsh environment. To increase the lifespan of the Zodiac G4 and hose, you should: 1. Remove the Zodiac G4 from the pool before Super Chlorinating and reinstall it a minimum of four hours later. 2. Always disconnect the hose from the skimmer or vacuum line before backwashing your filter. 3. Always store the hose straight.
SECTION 1 – INSTALLATION ADJUSTMENT SUGGESTIONS CORRECT BALANCING Diagram 1: Positioning of the hose weight Proper balancing must be accomplished in the DEEPEST area of the pool. The buoyancy of the hose tends to LIFT the ZODIAC G4™ especially in deeper water. The hose weight is provided to help neutralise the buoyant effect of the hose. POOL COVERAGE Normally it is undesirable for the return line water flow to affect the natural movement of your ZODIAC hose.
SECTION 1 – INSTALLATION AD FLOW VALVE The use of the Zodiac AD Flow Valve is recommended on pools with only one skimmer box/suction point, or when the filtration system needs to be used but the pool cleaner does not, such as when people are swimming in the pool. It regulates the flow of water to the pump through the pool cleaner. As the filter collects debris, the valve automatically maintains the correct flow to the cleaner. For installation of the AD Flow Valve see below: AD Flow Valve 1. 2. 3.
SECTION 2 – ZODIAC ACCESSORIES ZODIAC ACCESSORIES: PART ILLUSTRATION PART NO DESCRIPTION 1. W22800 Return Line Diverter Use when no other return inlet directional fittings exist 2. W70116 The Leaf Eater Use when heavy debris or leaf situations exist 1 2 Zodiac recommends the following water chemistry readings for optimal performance of any pool equipment Free Chlorine pH Total Alkalinity (ppm) Calcium Hardness (ppm) Cyanuric Acid (ppm) Australian Standard 1 – 3 ppm 7.2 – 7.