Instruction manual

SECTION 1 – INSTALLATION

Before connecting hose to the fittings in the skimmer box it is essential that all air

is removed from the cleaner head and hose.

4) For pools with more than one skimmer box; close off all suction points except

for the one the cleaner will be operating from.This provides the cleaner with

maximum suction.

The hose is now ready to be attached to the fittings in the skimmer box.

Tip: if hoses are difficult to connect, have a bucket of warm water handy to dip the

end of the hose into. This will soften and expand the plastic allowing a snug fit.