Instruction manual

SECTION 4 – DIAPHRAGM REMOVAL

DIAPHRAGM REMOVAL

Remove blockage and rinse. Do not use sharp objects as damage to diaphragm may occur.

If replacement parts are needed, contact Zodiac customer service on 1800 688 552

or your authorised Zodiac pool shop.

Step 1: Holding the frame assembly in

one hand, unscrew the blue hand

nut (approximately four turns

anti-clockwise).

Step 2: Pull the cassette out of the inner

head body.

Step 3: Grasp the cassette in one hand

and unscrew the inner extension

pipe (approximately four turns

anti-clockwise), then remove from

the cassette.

Step 4: Grasp the lip of the diaphragm

(yellow end) and pull the

diaphragm out. The inner pipe

will be attached and will make a

grating noise.

Step 5: Pull the diaphragm out of the end

of the inner extension pipe.

Leave the retaining ring on the

diaphragm and inspect for

blockage or cuts.

Step 3

Step 4

Step 5

Step 1

Step 2