Spec Sheet

© Copyright 2014 Zoeller Co. All rights reserved.
An Electrical Alternator is used on a Duplex pump application where automatic alternation of the pumps is desired for added protection in residential or commercial
applications. With one pump operating to handle normal ow, a second pump becomes operational in the event the water level continues to rise. The built-in
alarm system, a standard feature, can be connected to sound when the second pump becomes operational (3-oat switch system) or independently (4-oat switch
system). All electrical systems must be installed by a qualied electrician and according to the National Electrical Code. (See Section 430-71 though 430-113, plus
any others that apply.)
NEMA 1 ENCLOSURE
NEMA 4X ENCLOSURE
SECTION: 2.50.040
FM0486
0414
Supersedes
0910
Control Panel Features:
Hand-Off-Auto Toggle Switch for each pump
Green pump run pilot light for each pump
Alarm test and silence switches
Red pilot light (Nema 1 Only) and audible alarm with 83 to 85 decibel rating for
a high water condition
Red Alarm Beacon included with Nema 4X enclosure
Auxiliary Dry Contact
High Water Alarm
On Single Phase - Circuit breaker for each pump
On Three Phase - Motor protective switch with overload protection
Magnetic starter for each pump
Alternating mechanism
Numbered terminal strip for connecting pumps and variable level oat switches
Nema 1 - general purpose or
Nema 4X - Watertight enclosures available
Integral auxiliary terminal board connections (dry contact) for remote alarm
devices
3 or 4 variable level oat switch control operation
Three 20’ oat switches included with single phase panels
2 Year Warranty
The use of off-the-shelf components provide for relatively easy eld maintenance
and repair
Float switches not included with three phase panels (See FM0526)
ELECTRICAL ALTERNATOR CONTROL PANEL - FOR DUPLEX INSTALLATIONS
CONTROL PANEL USED WITH SINGLE PHASE PUMPS
Products may not be exactly as illustrated
* Branch circuit protection provided by installing electrician.
10-0092
10-0093
NOTE: 600 and X600 Series single phase pumps require special panels that include start components. See Selection Guide FM0712 for correct panel selection.
NOTE: All variable level oat switches in this section are mechanically activated and do not contain mercury.
C
R
L
U
US LISTED
C
R
L
U
US LISTED
Product information presented
here reects conditions at time
of publication. Consult factory
regarding discrepancies or
inconsistencies.
MAIL TO: P.O. BOX 16347 • Louisville, KY 40256-0347
SHIP TO: 3649 Cane Run Road • Louisville, KY 40211-1961
(502) 778-2731 • 1 (800) 928-PUMP • FAX (502) 774-3624
visit our web site:
www.zoeller.com
®
Your Peace of Mind is Our Top Priority
®
NEMA 1 ENCLUSURE WITH 20' FLOAT SWITCH
Order
No.
Dimensions
H x W x D
Volts Amp Range
10-1039
10-1040
12" x 10" x 6"
12" x 10" x 6"
115
115
7-15
15-20
10-0092 12" x 10" x 6" 115/200/230 0-20
NEMA 4X ENCLOSURE WITH 20' FLOAT SWITCH
Order
No.
Dimensions
H x W x D
Volts Amp Range
10-1041
10-1042
12" x 10" x 6"
12" x 10" x 6"
115
115
7-15
15-20
10-1043
10-1044
10-1045
10-1046
12" x 10" x 6"
12" x 10" x 6"
12" x 10" x 6"
12" x 10" x 6"
115/200/230
115/200/230
115/200/230
115/200/230
0-7
7-15
15-20
20-30
10-0093 12" x 10" x 6" 115/200/230 0-20

Summary of content (2 pages)