Product Overview

© Copyright 2004 Zoeller Co. All rights reserved.
2057 Nonautomatic with HT Float Switch
SECTION: 2.60.115
FM1922
0304
Supersedes
0203
2000 SERIES HIGH TEMPERATURE INTERMITTENT PUMPS
SUBMERSIBLE PUMPS FOR USE IN DEWATERING APPLICATIONS
INTERMITTENT USE UP TO 200 DEGREES F.
Product information presented
here reects conditions at time
of publication. Consult factory
regarding discrepancies or
inconsistencies.
MAIL TO: P.O. BOX 16347 • Louisville, KY 40256-0347
SHIP TO: 3649 Cane Run Road • Louisville, KY 40211-1961
(502) 778-2731 • 1 (800) 928-PUMP • FAX (502) 774-3624
visit our web site:
http://www.zoeller.com
2282 Nonautomatic with HT Float Switch
COMPARE THESE FEATURES
All models are designed to meet specications with
assurance by using high temperature parts rated for
intermittent 200°F contact.
High temperature switch components rated for
intermittent service up to 200°F.
Available in a variety of styles and performances:
.3 HP to 1/2 HP
115 volts or 230 volts, single phase
1-1/2”, 2” or 3” discharge
Pump cord length for all models is 15'.
ALL MODELS ARE BUILT TO LAST
15 ft. high temperature 16 gauge heavy-duty SOOW
cordage.
High temperature motor leads and thermal overload
protection.
Non-clog vortex impeller design.
100% corrosion resistant powder coated epoxy nish.
10 ft. cord, high temperature, adjustable oat operated
mechanical switch mounts directly to the discharge pipe.
(BN & BE Models)
Adjustable oat switch is not intended for continuous
contact with 200°F water.
All stainless steel ttings.
100% factory tested and approved.
TYPICAL APPLICATIONS:
Boiler blow-down.
Hot water transfer.
Plant wash-down.
Transformer vaults.
Industrial steam cleaning.
Manufacturers of . . .

Summary of content (2 pages)